tungsten carbide centrifuge tile
USD $5 - $100 /Piece
Min.Order:5 Pieces
Zhuzhou Hongtong Tungsten Carbide Co., Ltd.
tungsten carbide centrifuge tile
We can do both grinded and blanks . diameter from 1.0mm to 32.0mm , with length below 330mm.
1.K01/K10/20/30 tungsten rods made of super-hard alloy
2.Surface is smooth and straight
diameter* length(mm) | diameter* length(mm) | diameter* length(mm) | diameter* length(mm) | diameter* length(mm) | T/T payment | Grade No | |||||
0.5*330mm | 8.0*330mm | 16.5*330mm | 13.0*330mm | 23.0*330mm | T/T payment | YG10X | |||||
1.0*330mm | 8.5*330mm | 17.0*330mm | 13.5*330mm | 24.0*330mm | T/T payment | YL10.2 | |||||
1.2*330mm | 9.0*330mm | 17.5*330mm | 14.0*330mm | 25.0*330mm | T/T payment | YG8 | |||||
1.6*330mm | 9.5*330mm | 18.0*330mm | 14.5*330mm | 26.0*330mm | T/T payment | YB10.2 | |||||
1.8*330mm | 10.0*330mm | 18.5*330mm | 15.0*330mm | 27.0*330mm | T/T payment | ||||||
2.3*330mm | 10.5*330mm | 19.0*330mm | 15.5*330mm | 28.0*330mm | T/T payment | ||||||
2.5*330mm | 11.0*330mm | 19.5*330mm | 16.0*330mm | 30.0*330mm | T/T payment | ||||||
3.0*330mm | 11.5*330mm | 20.0*330mm | 5.0*330mm | 6.5*330mm | T/T payment | ||||||
3.5*330mm | 12.0*330mm | 21.0*330mm | 5.5*330mm | 7.0*330mm | T/T payment | ||||||
4.0*330mm | 12.5*330mm | 22.0*330mm | 6.0*330mm | 7.5*330mm | T/T payment | ||||||
4.5*330mm | T/T payment |
| ||||
Grade | Performance | Performance&application recommended | ||
Density | Bend Strength | Hardness | ||
G/Cm3 | N/mm2 | HRA | ||
YG6A | 14.95 | 1800 | 92.5 | Fine grain alloy, good wear resistance,Semi-finishin of chilled |
cast iron, non-ferrous metals alloys, semi-finishing and finishing | ||||
of hardened steel,alloy steel. | ||||
YG8 | 14.8 | 2200 | 89.5 | High strength in use,impact and shock resistnace higher than |
YG6,but wear resistance and cutting speed comparatively lower | ||||
Roughing of cast irons, non-ferrous metalsand their alloys as | ||||
well as non metallic materials at low cutting speed. | ||||
YG10X | 14.5 | 2400 | 91.5 | Fine grain alloy, good wear resistance,Used for processing hard |
wood, veneer board,PCB,PVC and metals. | ||||
YL10.2 | 14.5 | 2400 | 91.8 | Fine grade alloy,with high wear resistance,high bending strength |
|
|
|
| high resistance to bonding ,high termal strength,Machining of |
refractory alloys,stainless steel and high manganese steel,etc. | ||||
YG20 | 14.3 | 2420 | 90 | Conventional wear resistance, high bending strength,used for |
steel alloy etc. |