TC tube and bar drawing die for Wire Drawing machines
USD $30 - $35 /Kilogram
Min.Order:5 Kilograms
Zhuzhou Hongtong Tungsten Carbide Co., Ltd.
TC tube and bar drawing die for Wire Drawing machines
Picture of TC tube and bar drawing die for Wire Drawing machines
Free smaple was available!
Main Grade for TC tube and bar drawing die for Wire Drawing machines
Grade No. | Density (g/cm3) | HRA | T.R.S (Mpa) | Application |
YG3X | 14.9 | ≥91.5 | ≥1300 | For drawing non-ferrous metal wire and stainless steel wire etc. |
YG6 | 14.8 | ≥90.0 | ≥2150 | For drawing steel wire and stainless steel wire etc. |
YG6X | 14.8 | ≥92.0 | ≥1860 | For drawing nonferrous metal wire, steel wire, stainless steel wire. Good wear resistance and high toughness.. |
YG8 | 14.8 | ≥89.5 | ≥2320 | For drawing steel wire, stainless steel wire. Good general performance. |
YG11 | 14.4 | ≥88.5 | ≥2420 | For fabricating drawing dies of steel tubes and rods under high compressibility ratio; punching, stamping, forging tools under large stress. |
Application of TC tube and bar drawing die for Wire Drawing machines
stainless steel wire, aluminum wire, high carbon, MS wire etc
All the produces must be inspected strictly with the ultrasonic and only those haven’t any harm such as pore can be shipped out.
COMPANY INFORMATION
Our company:
ZhuZhou HongTong Tungsten Carbide Co., Ltd., located at Liyu Industrial Park, Zhuzhou National High-tech Development Zone, is a high-tech joint-equity enterprise integrating R&D, production and marketing of cemented carbide series products.
The company sets up an independent production and R&D base, covering a total area of 7,000m2 and a plant area of 4,000m2. There is a group of experienced technical personnel and a staff of 80 people including 5 engineers, 8 assistant engineers, and 29 people having college degree or above. The company mainly produces cemented carbide drawing dies, cold heading dies, mining tools, sealing rings, and other nonstandard products, wherein the cemented carbide drawing dies and cold heading dies take a leading position in the industry, and the bore of wire-drawing die can be minimized to 0.1mm, deeply popular with customers.
WORKSHP INFORMATION
PHYSICAL & CHEMICAL LAB
Q1 : Are you Factory or trading company ?
We are Factory with 15 years of production experience.
Q2: Where is your factory located ?
We are located in Liyu Industrial Park, Zhuzhou National High-tech Development Zone, is a high-tech joint-equity enterprise integrating R&D, production and marketing of cemented carbide series products.
Q3: Is the price Competitive?
We have our own Factory. Thanks to strong production and distribution system, we promise to offer our customers the most competitive price.
Q4: Are the products of high quality TC tube and bar drawing die for Wire Drawing machines?
Yes. All products will be tested before bulk production, and we will check the physical properties, shape and tolerance for ensuring qualified products before shipping.
Q5: How to place an order for TC tube and bar drawing die for Wire Drawing machines?
1. Fill your Order List in our online Inquiry System
(Also you can directly contact our salesperson by E-mail / Skype / Whats App)
2. We will make a feedback to you ASAP after receive your order list.
Q6: How we can trust your company ?
We support Aliababa trade insurance , 100% products quality protection, 100% on -time shipment protection, 100% payment protection for your covered amount.
Q7: What’s your delivery time ?
For the normal type which we have mold it takes 7-15 days after receiving the advance payment.
For the non standard which we do not have mold it takes 15-35 days after receiving the advance payment.