Product Details

Hot sale tungsten carbide copper wire drawing dies with different size

Features of Tungsten carbide dies

1. Material:100% virgin raw material with submicron grain size

2. Grade: Various grades for choice

3. Advanced production equipments and testing equipments

4. Precious Ground and polished

5. High wear resistance,high hardness and impact toughness

6. Advanced technology, automatic pressing, HIP sintering and precision grinding

7. Samples & small orders are acceptable.

Application:

1. Used for making high temperature parts, wear parts, anti-shielding parts and corrosion-resistant parts.

2. Used in making hardware and standard stamping moulds.

3. Applicable for electronic industry, motor rotor, stator, LED lead frame, EI silicon sheet and so on.

4. Used for producing drawn mold, wear-resistant parts, stamping parts and automatic press with punch.

5. Used for stamping die, extrusion die, stamping molds.

6. Drawing many kinds of steel wire, aluminum wire, high carbon, MS wire etc

Free smaple was available!

Main Grade for With Tungsten Carbide dies - Tungsten carbide wire dies (T/C dies)

Grade No.	Density (g/cm3)	HRA	T.R.S (Mpa)	Application
YG3X	14.9	≥91.5	≥1300	For drawing non-ferrous metal wire and stainless steel wire etc.
YG6	14.8	≥90.0	≥2150	For drawing steel wire and stainless steel wire etc.
YG6X	14.8	≥92.0	≥1860	For drawing nonferrous metal wire, steel wire, stainless steel wire. Good wear resistance and high toughness..
YG8	14.8	≥89.5	≥2320	For drawing steel wire, stainless steel wire. Good general performance.
YG11	14.4	≥88.5	≥2420	For fabricating drawing dies of steel tubes and rods under high compressibility ratio; punching, stamping, forging tools under large stress.

ZhuZhou HongTong Tungsten Carbide Co., Ltd., located at Liyu Industrial Park, Zhuzhou National High-tech Development Zone, is a high-tech joint-equity enterprise integrating R&D, production and marketing of cemented carbide series products.

The company sets up an independent production and R&D base, covering a total area of 7,000m2 and a plant area of 4,000m2. There is a group of experienced technical personnel and a staff of 80 people including 5 engineers, 8 assistant engineers, and 29 people having college degree or above. The company mainly produces cemented carbide drawing dies, cold heading dies, mining tools, sealing rings, and other nonstandard products, wherein the cemented carbide drawing dies and cold heading dies take a leading position in the industry, and the bore of wire-drawing die can be minimized to 0.1mm, deeply popular with customers.