YG8 USD160 PER PCS tungsten carbide disc cutter/PCS BLADES,LEAD WIRE CUTTERS
USD $10 - $200 /Piece
Min.Order:5 Pieces
Zhuzhou Hongtong Tungsten Carbide Co., Ltd.
Mostly used for cutting the pin lines/ lead wires of capacitors / diode /transistors on electronic ballasts or printed circuit board . also can process to be saw blade. with high quality but workable price , prompt delivery . also we have received the patent about this item.
Grade | Performance | Performance&application recommended | ||
Density | Bend Strength | Hardness | ||
G/Cm3 | N/mm2 | HRA | ||
YG6A | 14.95 | 1800 | 92.5 | Fine grain alloy, good wear resistance,Semi-finishin of chilled |
cast iron, non-ferrous metals alloys, semi-finishing and finishing | ||||
of hardened steel,alloy steel. | ||||
YG8 | 14.8 | 2200 | 89.5 | High strength in use,impact and shock resistnace higher than |
YG6,but wear resistance and cutting speed comparatively lower | ||||
Roughing of cast irons, non-ferrous metalsand their alloys as | ||||
well as non metallic materials at low cutting speed. | ||||
YG10X | 14.5 | 2400 | 91.5 | Fine grain alloy, good wear resistance,Used for processing hard |
wood, veneer board,PCB,PVC and metals. | ||||
YL10.2 | 14.5 | 2400 | 91.8 | Fine grade alloy,with high wear resistance,high bending strength |
high resistance to bonding ,high termal strength,Machining of | ||||
refractory alloys,stainless steel and high manganese steel,etc. | ||||
YG20 | 14.3 | 2420 | 90 | Conventional wear resistance, high bending strength,used for |
steel alloy etc. |
Properties and applications of tungsten carbide for disc Cutters | ||||||
Grade | Performance & application recommended | |||||
Density | T.R.S | Hardness | ||||
g/cm3 | MPα | HRA | ||||
SH6A | 14.9 | 1850 | 92.0 | ine grain alloy, good wear resistance. | ||
SH10A | 14.8 | 2450 | 90.5 | High wear resistance, high bending strength,,used for dis saw blads in electrical line. | ||
SH25 | 14.8 | 2200 | 89.5 | High strength in use, impact and shock resistance higher than YG6, but wear resistance and cutting speed comparatively lower. | ||
SH30 | 14.7 | 2320 | 89.5 | Roughing of cast irons, non-ferrors metals and their alloys as well as non metallic materials at low cutting speed. | ||
SH35 | 14.5 | 2200 | 91.0 | Fine grain alloy, good wear resistance. Used for processing hard wood,veneer board,PCB,PVC and metals. | ||
SH40 | 14.5 | 2480 | 92.0 | Machining of refractory alloys, stainless steel and high manganese steel, etc. | ||
SH50 | 14.3 | 2420 | 90.0 | Conventional wear resistance, high bending strength,used for steel alloy etc. |
Customized design is available. OEM & ODM are welcomed.