Product Details

Our products including the following:

i.Powder metallurgy dies:

1.Non-Ferrous metal moulds: like gear finished die,sizing die,automobile parts,motor driven tool parts,etc.

2.Magnaglo moulds: like E shape dies,U shape dies,PM shape dies,G shape dies,etc.

3.Tungsten carbide moulds: like wire-drawing die,indexable inserts dies,mining tools dies,squeezing die,steel die,etc.

ii.Kinds of tungsten carbide TF products:

1.Tungsten carbide nonstandard dies: like cold heading dies,battery dies,carbide blanking dies,stretching die,etc.

2.Tungsten carbide wear parts:carbide rollers,carbide gauge,tungsten carbides inserts,carbide roll collar,carbide plug gauge,etc.

ii.Tungsten carbide products:carbide board,Bars,etc

If you are interested in our goods,please don't hesitate to contact us for further information.You shouldn't miss it!

Carbide mining bits

Grade introduction
Grade	Performance			Performance&application recommended
	Density	Bend Strength	Hardness
	G/Cm³	N/mm²	HRA
YG4C	15.1	1800	90	Mainly used as small buttoon ns for percussion bits to cut soft and medium
				hard formations.
YG6	14.95	1900	90.5	For coring crowns,electric coal drill bits, coal cutting picks,oil cone bits and
				scraping knife bits,used in geological prospecting,coal mining and oil well
				boring.
YG8	14.6-14.9	≥1840	≥89	Qualified for rough machining of cast iron, non-ferrous metal, nonmetal materials, drawing of steel, non-ferrous metal and pipes, various drills for geology use, tools for machine manufacture and wearing parts.
YK05	14.95	2500	90.5	Mostly used as the buttons of small and medium sized percussion bits and as
YG8C	14.8	2400	88.5	the inserts of rotary prospecting bits to cut soft and medium hard formation.

YK15	14.6	2450	87.6	Suitable to strips, conical buttons for rotary percussion-resistant,geological
				prospectioin buttons, cut soft and medium hard formation.
YK20	14.4	2500	86.8	Primarily for the buttons and inserts of rotary percussion bits to cut
				medium-hard and very hard formations.
YK25	14.4	2550	87.2	Primarily for the buttons and inserts of rotary percussion bits to cut
				medium-hard and very hard formations.
YG11C	14.4	2700	86.5	Largely for the inserts and buttons of percussion bits and tricone bits to cut
				medium-hard, hard and very hard formations.
YG13C	14.2	2850	86	Primarily for the buttons of tricone bits and inserts or rotary percussion bits to
				cut hard and very hard formations.
YG15C	14	3000	85.5	For oil cone dril bits, for medium soft and medium-hard rocks.