Product Details

Multi-function Electric Bus-bar Bender

Use and Characteristic

Multi Function Hydraulic Busbar Processor is the combination of punching,bending and cutting.

The manometer with the pressure of 1000kgs/cm makes the process under control,prevent the machine from overloading.

The hand switch can be adjusted easily to control the depth and the width of the sheet

Four direction valve makes the process of punching,bending and cutting go accurately

Reliable and stable foot-type switch

Application :

This processor is suitable for making large electric cabinet ,power distribution cabinets ,switch

cabinets and power transmission and distribution construction engineering construction site use.

Feature :

This machine is with reference to foreign advanced products ,combined with domestic practical

situation , to provide the efficiency and guarantee of safety requirement and the design of form a

complete set of equipment .

Most suitable for making large electric cabinet and transmission and distribution construction

project fields use .High flexibility , small volume , big power , high production capacity and high

work efficiency .Low noise ,harmless processing . Finishing product is beautiful and won't cause

pollution to the environment .

Technical Data

Product No.	80098
Model Type	OK-501
Normal Operating Pressure(Psi)	1000
Power Souce(12V)	220V/380V 50Hz
Output of cutting machine(KN)	200
Cutting Range(mm)	copper and aluminum≤ 150*12
Output of hole punching machine(KN)	300
Hole punching range(mm)	Φ11.5 - Φ19.5
Output of bending machine(KN)	270
Flatting range(mm)	copper and aluminum≤ 120*12
Bending range(mm)	copper and aluminum≤ 120*12
Flatting Angle(°)	0-135
Bending Angle(°)	0-90
Weight(kg)	188

Detail Picture

Different Types

DHY-150

Model NO.			DHY-150
Funtion			Cutting,Punching and Bending
Rated Working pressure			63MPa
Power			750W/220V/50Hz
Cutting Force			15T
Cutting Range			Cu/Al 150(width)*10mm(thickness)
Punching Force			20T
Punch Range			Cu 10mm,Steel 8mm,Al 12mm
Punching Standard Die			10.5, 13.8, 17, 20.5mm
Bending Force			16T
Bending Range			150(Width)*10mm(Thickness)

DHY-200

Model NO.			DHY-200
Funtion			Cutting,Punching and Bending
Rated Working pressure			63MPa
Power			750W/220V/50Hz
Cutting Force			35T
Cutting Range			Cu/Al 200(width)*12mm(thickness)
Punching Force			35T
Punch Range			Cu 12mm,Steel 10mm,Al 14mm
Punching Standard Die			10.5, 13.8, 17, 20.5mm
Bending Force			20T
Bending Range			200(Width)*12mm(Thickness)

DHY-401

Model NO.			DHY-401
Funtion			Cutting,Punching,Flating and Bending
Rated Working pressure			63MPa
Power			750W/220V/50Hz
Cutting Force			35T
Cutting Range			Cu/Al 200(width)*12mm(thickness)
Punching Force			35T
Punch Range			Cu 12mm,Steel 10mm,Al 14mm
Punching Standard Die			10.5, 13.8, 17, 20.5mm
Flat Bending Force			63MPa
Flat Bending Range			Cu/Al width 40,50,60,80,100,120mm
Thickness			4-12mm

DHY-501

Model NO.			DHY-501
Funtion			Cutting,Punching,Flating,Bending and Embossing
Rated Working pressure			63MPa
Power			750W/220V/50Hz
Cutting Force			35T
Cutting Range			Cu/Al 200(width)*12mm(thickness)
Punching Force			35T
Punch Range			Cu 12mm,Steel 10mm,Al 14mm
Punching Standard Die			10.5, 13.8, 17, 20.5mm
Flat Bending Force			63MPa
Flat Bending Range			Cu/Al width 40,50,60,80,100,120mm
Thickness			4-12mm
Embossing Force			55T
Embossing Thickness			12.5mm
Embossing Force			150mm