Specifications

1. extrusion blow molding machine
2. 5 gallon Blow Molding Machine
3. capacity of 70-75BPH, reliable components.

Extrusion Blow Molding Machine, 5 gallon Blow Molding Machine, Extrusion Machine

 

Characteristics:

1  It adopts a special exhaust type screw for PC material;

2  Extrusion device could be adjusted in four directions: forward/backward, upward/downward;

3  Blow nozzle could be adjusted in six directions: forward/backward, upward/downward, right/left;

4  It adopts MISUBISHI PLC control system, which is made in Japan;

5  The thickness control system is selectable, which adopts MOOG30 point hydraulic servo system;

6 Complete safety control system always assure the operator in safe situation.

 

ITEM		SPECIFICATION
MODEL		TDB-25APC
Max. Bottle Volume		25L
Max. Capacity		80BPH
EXTRUSION UNIT	Screw Diameter	mm	82
	Screw L/D Ratio	L/D	38
	Screw Driving power	KW
	Screw Heating Capacity	KW	16.7
	Heating zone	ZONE	8
	Plasticizing Capacity	kg/h	160PC
	Oil Pump Driving Power	KW	45
MOLD UNIT	Clamping Force	KN	215
	Mold Stroke	mm	350-780
	Max. Size of Mold (WXH)	mm	550*650
DIE HEAD	Capacity	L	1.9
	Max. Die Diameter	mm	150
	Die Heat Capacity	KW	4.1
	Heating Zone	ZONE	4
OTHER	Blowing Pressure	Mpa	1.2
	Air Consumption	M3/MIN	1
	Water Consumption	L/MIN	150
MACHINE	Dimension (LXWXH)	m	6.3×2.3×4.55
	Weight	TON	11.8