P810 is intended to be used for MS-Windows configuration software.The interface enables the user to access the configuration stored within the module to allow changes to be made to the various settings.P810 cable used to connect controllers to computer for setting

Interface module
25 way to 9 way RS232 adapter cable

Interconnecting FCC 68-8way cable which connects to the appropriate connector on the module.

Software diskettes (or a CD) containing the P810 for Windows PC software and various module configuration files to aid rapid module configuration.

Also included on the disk is a MS Word™ template,this can be used to make labels for the configurable LED’s on the module to identify their function.A slot is provided behind the clear window in the label for this,accessed by removing the front bezel.

The software will offer the user the following options:

LOAD previous configurations from disk.

AVE new configurations to disk.

READ the existing configuration from the module.

WRITE a new configuration to the module.

EDIT the configuration currently loaded in the PC.

PRINT the configuration currently loaded in the PC.

View the 'SCADA' display from the module.

SET-UP the software such as COM port selection.

QUIT back to Ms-Windows™.

Set-up the Optional Remote

Telemetry & Control functions

The main use of the software is to EDIT the modules' configuration to allow for use with a particular application.Values such as analogue trip and alarm levels,timers,input function selection,relay output functions etc. can all be adjusted on the PC screen and then 'WRITTEN' to the module.

For further details on using the software,please refer to the P810 for Windows Software manual.

NOTE:The 810 module incorporates opto-isolation devices within its construction.This ensures trouble free connection to earthed desk-top type PC's and laptops alike in module configuration and generator testing environments.This allows it to be used at distances up to 100 metres away from the controller.