Genset Controller Automatic Start Module 703
USD $1 - $50 /Piece
Min.Order:1 Piece
Chongqing Boce Technology Co., Ltd.
Genset Controller Automatic Start Module 703
1.Main Features:
Automatic shutdown when fault conditions are detected
Manual start
Engine pre-heat
Engine monitoring and protection features
Protected solid state (PSS) outputs
Front panel mounting
Front panel programming
Remote start
LED indicators
Configurable timers
Configurable outputs
2.Benefits:
Transfers between mains (utility) and generator power
On-site module configuration to match user requirements
Multiple engine parameters are monitored simultaneously
3.Specifications:
DC Supply: | 8 Volts to 35 Volts DC Continuous. |
Cranking Dropouts: | Able to survive 0 Volts for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 Volts. This is achieved without the need for internal batteries. |
Max. Current: | Operating 50mA |
| Standby 10mA |
Alternator Input Range: | 75 Volts (ph-N) to 277 Volts (ph-N) AC (+20%) |
Alternator Input Frequency: | 50 - 60 Hz at rated engine speed (Minimum: 75V AC Ph-N) (Crank Disconnect from 15V Ph-N @ 20Hz) |
Overspeed +14% (+24% overshoot) | |
Underspeed –20% | |
Start Output: | 1.2 Amp DC at supply voltage. |
Fuel Output: | 1.2 Amp DC at supply voltage. |
Auxiliary Outputs: | 1.2 Amp DC at supply voltage. |
Dimensions: | 125mm x 165mm x 28 mm |
Charge Fail: | 12 Volts = 8 Volts CF 24 Volts = 16 Volts CF |
Operating Temperature Range: | -30 °C to + 70°C |
Applicable Standards: | Compliant with BS EN 60950 Low Voltage Directive |
Compliant with BS EN 50081-2: 1992 EMC Directive | |
Compliant with BS EN 61000-6-4: 2000 EMC Directive |
Why choose us------?
In line with the quality=life and belief in people-oriented,
continuous improvement management. Coupled with honesty, pragmatism.
Innovation and spirit of the pursuit of the perfect blog for the word each generator to
Create an intelligent heart.
Here are the advantages of our company:
Our factory and certification: