Name: Spherical plain and rod end bearing GE15E
Brand: CLUNT
Availability: InStock

Product Details

Spherical plain and rod end bearing GE15E

Brif introductions of Spherical plain bearing GE15E

Joint bearing is a special structure of sliding bearing. It has the advantages of simple structure than the rolling bearing, which is mainly composed of an outer spherical surface of the inner ring and the outer ring has an inner spherical form, able to withstand greater load, according to the different type and structure, can bear radial load, axial load and radial, axial and the existence of joint load.

Ball joints are the pivot between the wheels and the suspension of an automobile. Ball joints play a critical role in the safe operation of an automobile's steering and suspension. Ball joints can also be found in most linkage systems for motion control applications, and should not be confused with spherical rod end bearings, which are a different design.

Sealed ball joints do not require lubrication as they are "lubed for life" but standard ball joints must be lubed from time to time. It's best to inspect standard ball joints once a year. Generally speaking, standard ball joints will outlive sealed ones because eventually the seal will break, causing the joint to dry out and rust. While there is no exact lifespan that can be put on a sealed ball joint, they can fail as early as 80,000 miles. Signs of a failing ball joint start with a clicking or snapping sound when the wheel is turned and eventually turns into a squeaking sound at the end of a stop, when the gas pedal is used and/or also when hitting bumps. Another symptom could be 'thud' noises coming from front suspension when going over bumps.

Quick Details of Spherical plain bearing GE15E

1.The inner and outer rings are coated with molybdenum disulphide for reduced sliding friction.

2.These spherical plain bearings have a single fractured outer race.

3.This spherical plain bearing does not have grooves and thru holes.

4.This spherical plain bearing must be properly lubricated with grease.

d	15
D	26
B	12
C	9
dk	22
rls	0.3
r2s	0.3
α°≈	8
Cr	17
Cor	85
Bearing Code	GE15E
Mass weight	0.025

Joint bearings application	Self-lubrication ball joint bearing is a kind of special structure of sliding bearings.Joint bearings is widely applied in engineering, hydraulic oil cylinder metalforming machine
Joint bearings classification	Such as SB type, type, GE, CF series,and the amount and type of other types of the joint bearings and fixed-end joint bearings, etc.
Number of row	single row or double row
Material	chrome steel ,stainless steel,and bearing steel
Vibration and noisy lever	Z1,Z2
Tolerance Code	ABEC-1
Packing	Single box+carton+pallet or Customer requirement

Classification and features of Spherical plain bearing GE15E

1. To the heart joint bearings

(1) GE... E model sheet, no lubrication oil every outer ring. Can bear radial load and any direction of smaller axial load.

(2) GE... ES type single-slit invading.this, lubrication oil groove. Can bear radial load and any direction of smaller axial load.

(3) GE... ES - 2RS type single-slit invading.this, lubrication oil groove, with seals at both. Can bear radial load and any direction of smaller axial load.

(4) GEEW... ES - 2RS type single-slit invading.this, lubrication oil groove, with seals at both. Can bear radial load and any direction of smaller axial load.

(5) GE... ESN type

Single slit outer ring, have lubrication oil groove, outer ring have check dynamic slots. Can bear radial load and any direction of smaller axial load. But the axial load by stop ring inherit, its axial load capacity reduction.

(6) GE... XSN type

A double-slit outer profile especially circle (), there is lubrication oil groove, outer ring have check dynamic slots. Can bear radial load and any direction of smaller axial load. But the axial load by stop ring inherit, its axial load capacity reduction.

(7) GE... HS type lubrication oil groove, inner ring has double half invading.this, after wearing clearance can be adjusted. Can bear radial load and any direction of smaller axial load.

(8) GE... DE1 type

Inner ring for hardened bearing steel, outer ring for bearing steel. Inner circle assembling extrusion, lubricating oil and oil hole. Inner diameter less than 15mm bearings, no lubrication oil and oil hole. Can bear radial load and any direction of smaller axial load.

(9) GE... DEM1 type

Inner ring for hardened bearing steel, outer ring for bearing steel. Inner circle assembling extrusion, bearing load bearing outer ring pressed, after the end ditch makes bearing axial fixation. Can bear radial load and any direction of smaller axial load.

(10) GE... DS type

Outer ring have assemble slots and lubricating slots. Limited to large size bearings. Can bear radial load and any direction of smaller axial load (assembly slot side can not bear the axial load).

2. Angular contact joint bearings

GAC... S-type inside and outside circle were hardened bearing steel, outer ring have tanks and oil hole. Can bear radial load and a direction (joint) axial load.

3. Thrust joint bearings

GX... S-type shaft lap and seat ring are hardening bearing steel, Seat ring have tanks and oil hole. Can bear a direction of axial load or combined load (right now the radial load value nor larger axial load value of 0.5 times).

4. Fixed-end joint bearings

(1) SI... E type is GE... E type bearings and pole terminal assembly body. With female threaded rod ends, materials for carbon steels, No lubrication oil groove. Can bear radial load and any direction less or equal 0.2 times radial load of the axial load.

(2) SA... E type is GE... E type bearings and pole terminal assembly body. Fixed-end out-of-band thread, materials for carbon steels, No lubrication oil groove, can bear radial load and any direction less or equal 0.2 times radial load of the axial load.

(3) SI... ES type is GE... ES type bearings and pole terminal assembly body. With female threaded rod ends, materials for carbon steels, Have lubrication oil groove. Can bear radial load and any direction less or equal 0.2 times radial load of the axial load.

(4) SA... ES type is GE... ES type bearings and pole terminal assembly body. Fixed-end out-of-band thread, materials for carbon steels, Have lubrication oil groove. Can bear radial load and any direction less or equal 0.2 times radial load of the axial load.

(5) SIB... S-type with female threaded rod ends, materials for carbon steels, Inner ring for hardened bearing steel, Have lubrication oil groove. Can bear radial load and any direction less or equal 0.2 times radial load of the axial load.

(6) SAB... S-type fixed-end out-of-band thread, materials for carbon steels, Inner ring for hardened bearing steel, Have lubrication oil groove. Can bear radial load and any direction less or equal 0.2 times radial load of the axial load.

(7) SQ... Type for ball head fixed-end joint bearings, fixed-end for carbon steels, Ball head for carburizing steels. Can bear radial load and any direction of smaller axial load.

Numbers of joint bearing

Model	Size
GE12E	12 x 22 x 10
GE15ES	15 x 26 x 12
GE16ES	16 x 30 x 14
GE17ES	17 x 30 x 14
GE20ES GE20ES2RS	20 x 35 x 16
GE25ES	25 x 42 x 20
GE30ES	30 x 47 x 22
GE40ES GE40ES2RS	40 x 62 x 28
GE45ES	45 x 68 x 32
GE50ES	50 x 75 x 35
GE55ES	55 x 85 x 40
GE60ES	60 x 90 x 44
GE70ES	70 x 105 x 49
GE80ES GE80ES2RS	80 x 120 x 55
GE90ES	90 x 130 x 60

The pictures: