Main Products: Bearings
koyo bearings catalogue 352132 Japanese 352132 bearings roller
USD $33.47 - $33.47 /Piece
Min.Order:5 Pieces
Quick Details View All >
Jinan Kelunte Bearing Co., Ltd.
Business Type: Trading Company
Shandong ChinaMain Products: Bearings
used for moderate speed, heavy duty applications international brand NTN taper roller bearing 32011
back-to-back pairs saparable bearing NTN 32012 for supporting axial forces in either direction
Suitable forautomobiles & motorcycles NTN needle roller bearing NA4826A with high load capacity
Small car parts bearing wheel 7001C angular contact ball bearings with high speed
skateboard bearings 6005 Full Ceramic Ball Bearing 25x47x12 ZrO2 Ball Bearings
Product Details
koyo bearings catalogue 352132 Japanese 352132 bearings roller
Descriptions of 352132 bearings
352132 bearings are uniquely designed to manage both thrust and radial loads on rotating shafts and in housings. We manufacture all types of tapered roller bearing combinations – in single, double and four-row tapered roller bearing configurations. Customized geometries and engineered surfaces can be applied to these tapered roller bearings to further enhance performance in demanding applications.
352132 bearings consist of four interdependent components: the cone, or inner ring; the cup, or outer ring; the tapered rollers, or rolling elements; and the cage, or roller retainer. The taper angles allow the bearing to handle a combination of radial and thrust loads. The steeper the cup angle, the greater the ability of the tapered roller bearing to handle thrust loads.
352132 bearings can take both large axial forces, and radial forces due to their cup and cone design. The inner and outer races are separable and shaped like a cone; the rollers also have a taper. This tapered design distributes the weight and results in a bearing capable of handling relatively high loads. The larger the half angles of these cones the larger the axial force that the bearing can sustain. The outer race is called the cup and the non-separable inner race and rollers are called the cone. Internal clearance is created during installation by the position of the cone in relation to the cup.
352132 bearings can be separated from the inner ring with roller cage components together and the outer ring can be installed separately. As amended by the roller and raceway contact at the contact line can reduce the stress concentration. The tapered roller bearing can withstand large radial and axial load. Tapered roller bearings can only pass one-way axial load, axial load in the opposite direction to pass on another with symmetrical installation of tapered roller bearings. The tapered roller bearings, the largest amount of single row tapered roller bearings. In the front wheels of cars in recent years, using the small size of the double row tapered roller bearings. Four tapered roller bearings used in a large cold and hot rolling mill and other heavy machinery.
The most basic and widely used tapered bearing, the single-row type consists of the cone assembly and the cup. It is usually fitted as one of an opposing pair. During equipment assembly, single-row bearings can be set to the required clearance (endplay) or preload condition to optimize performance.
Double row 352132 bearings can carry heavy loads and are stiff. They are suitable for the accommodation of combined (radial and axial) loads and can locate a shaft axially in both directions with a given axial clearance or a given preload. Their main use is in gearboxes, hoisting equipment, rolling mills and machines used in the mining industry, e. G. Tunnelling machines.
Tapered roller bearings (TRBs) utilize rolling elements that are shaped like a truncated cone (Figure 1), and are constructed so that all tapered surfaces converge at a common apex point on the bearing centerline to yield true rolling motion (Figure 2). Tapered roller bearings are generally used in lower speed, high load applications and are capable of absorbing radial and/or axial loads. The internal angles may be designed to tailor the bearing to the loading demands of a specific application. Tapered roller bearings are a separable two-piece design (cup and cone) (Figure 3); which, allows the end-use to optimize the internal clearance (and life) for each application when the bearing is mounted. PEER primarily manufactures single row (TS), sealed single row (LA), and matched set tapered roller bearings.
Specifications of 352132 bearings
352132 bearings is made of chrome steel, is unsealed, and has a steel cage. This double row taper roller bearing is suitable for applications that support both radial and axial loads. This bearing's inner and outer races are made of chrome steel for durability and resistance to deformity under heavy loads. This bearing is open for lubrication in place. A steel cage evenly spaces rollers for reduced friction, vibration, and noise. This bearing supports heavier loads than bearings with comparable-sized ball bearings. This taper roller bearing is suitable for use as a wheel bearing.
Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
| Boundary dimensions (mm) | Structure | Calculating coefficient | Basic load ratings (KN) | Speed ratings (r/min) | Weight (KG) | |||||||||||||
| d | D | T | C | B | b | D1 | Rsmin | rsmin | e | Y1 | Y2 | Y0 | dyc_Cr | stc_Cor | Grease | Oil | ||
| 160 | 270 | 150 | 120 | 66 | - | - | 2.5 | 0.8 | 1 | 0.36 | 1.86 | 2.76 | 1.81 | 955 | 1715 | 1000 | 1400 | 32.1 |
Modle No. | 352132 bearings |
Structure | taper |
Type | roller |
Specification | 160x270x150mm |
Seal Type | open |
Bearing material | Gcr15(bearing steel),stainless steel, carbon steel |
Cage material | Steel, nylon |
Clearance | C0,C1,C2,C3,C4 |
Vibration | ZV1,ZV2,ZV3 |
Precision rating | P3,P4,P5 |
Number of row | double row |
Guarantee | One year |
Application | Mechanical part |
Certification | ISO9001:2000 |
Package | According to the customer’s requirement |
Place of origin | China |
Service | OEM service After-sale service |
Payment Term | T/T,L/C |
Port | Shenzhen or Shanghai |
Features of 352132 bearings
Advantages of 352132 bearings
Benefits of 352132 bearings
Product Offering:
Bore Size: 15mm~200mm
Outside Diameter: 35mm~260mm
Ring Material: SAE 52100 ~ ISO 100Cr6 ~ GB/T GCr15
Seal Material: Nitrile
Precision Classes
ISO Metric: Normal, P6X
Inch: Class 4, Class 2
J line Metric: Class K, Class N
Heat Stabilization: S0, S1, S2, S3
Model numbers of taper roller bearing
| New items | Old items | Specification(mm) | N.W(kg) |
| 32203 | 7503E | 17×40×17.25 | - |
| 32204 | 7504E | 20×47×19.25 | 0.158 |
| 32205 | 7505 | 25×52×19.25 | 0.174 |
| 32205 | 7505E | 25×52×19.25 | 0.199 |
| 32206 | 7506E | 30×62×21.25 | 0.282 |
| 32207 | 7507E | 35×72×24.25 | 0.449 |
| 32207 | 7507EK | 35×72×24.25 | 0.423 |
| 32208 | 7508E | 40×80×24.75 | 0.533 |
| 32209 | 7509E | 45×85×24.75 | 0.583 |
| 32209 | 7509EK | 45×85×24.75 | 0.587 |
| 32210 | 7510E | 50×90×24.75 | 0.614 |
| 32211 | 7511 | 55×100×26.75 | 0.93 |
| 32211 | 7511E | 55×100×26.75 | 0.849 |
| 32211 | 7511EK | 55×100×26.75 | 0.875 |
| 32212 | 7512E | 60×110×29.75 | 1.1 |
Contact Supplier
You May Like
New Products
Popular Searches
Recommended Products
Find Similar Products By Category
Facebook
X
Pinterest
Linkedln