ZG bridge type peripheral transimission sludge scraper
I. Use and Profile
Peripheral transmission sludge scraper is suitable for water supply and drainage engineering and the diameter of water or sewage treatment plant(φ>15m) of the radial flow (round) scraping mud and skimming tank.
The product has passed provincial identification. For the national science and technology commission the ministry of construction machinery bureau recommended products.
II. Performance Characteristics
Simple structure, convenient maintenance and management , power consumption province. Smooth operation, safe and reliable work. Scraping sludge effect is good, to discharge the sludge moisture content is low.
III. Structure and Work Principle
Peripheral transmission sludge scraper is mainly composed of center rotating bearing, main girder beams, folded plate beam(truss) and guide cylinder, scraping mud slag, collecting device, driving mechanism , etc. Raw water from the bottom of the upper central piers, and after diversion tube of water distribution, the radiation to surrounding sump tank water pool, with the reduction of radial velocity of suspended matter in raw water is separated and settling at the bottom. Rotate the truss, centered on center bearing and under the action of wheels in the drive. Weeks for rotary running along the pool, drive lower turning slowly scraping mud version, set to the settling basin center set scraping the mud tank, depend on the hydrostatic pressure or pump discharge pool, top dross from scraping slag board synchronization to discharge hopper eduction.
1. guide cylinder 2.center rotating bearing 3.mud collecting tank 4. scraping sludge plate
5. rotate the truss 6. discharge hopper 7. catch water channel (catch basin) 8.driving device
IV. Technical Parameters
1. How to buy your interested products?
ANS: You can provide us the water sources, water quality, flow rate and ground area, material requirements about your project (More details, please contact us).
2. How to pay?
ANS: TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balance before loading by TT.
3. What is the delivery time?
ANS: It depends on order quantities. Generally speaking, the delivery time will be within 4 to 6 weeks.
4. How to pack the products?
ANS: We use standard package. If you have special package requirements, we will pack as you required, but the fees will be paid by customers.
5. How to install after the equipments arriving destination?
ANS: We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you. However, the visa fee, air tickets, accommodation, wages will be paid by buyers.
6. How long is the validity?
ANS:The validity is 12 months from B/L date.