Specifications

sand water separator
1.Diameter of spiral:260-420mm
2.Capacity:5~35L/S
3.Motor power:0.37kw,0.75kw
4.Speed:4.8~5r/min

 LSF type Spiral Sand Water Separator

Equipment overview:

Spiral sand water separator is applicable to the sewage treatment plant heavy sand pool, is the organic wastewater separation of sand and upgrade the integration of the equipment, but isolated quartile 0.2 mm particles size, high separation efficiency, equipment is without shaft screw, no water bearing, with light weight, compact structure, reliable operation, installation is convenient wait for a characteristic, it is a kind of ideal sand water separation equipment.
Its main features:
This equipment except sand by the changes of water has little influence effect, and compact structure, operating and maintenance convenience, service life is long;
Mention sand two different ways: gas lift type and pump mention type, gas lift processing effects are relatively good, pump carry relatively low cost;
Equipment operation is simple, and can be local/remote control the operation of equipment.

Working principle:

This equipment screw water separator sand by water tank, helicoid and slow drive device component, equipment installation Angle in 20 °-30 ° between, sand mixture water from feed line into the water tank, a larger share of the mixture of grain (such as sand) with dead weight descended deposit on the spiral groove bottom, the push of the spiral, materials for U along the groove bottom ascension, leave after liquid surface, continue to move up from a distance, the moisture in the sand in the spiral groove gradually shed clearance to water tank, sand also gradually dry in the material in the mouth, rely on the dead weight fall into other conveyer. Clear liquid is constantly on the move from drains. Reach sand water separation purpose.

Technical parameters: