Specifications

Screen PKG
1.Motor power: 2.2-4.0
2.Installion Angle:60-80 degree
3.Linear velocity: 3m/min
4.Material: SS/carbon stee

Mechanical bar screen device

 

Usage

1. Water supply and drainage engineering pump stations, water inlet fine grille, remove fine grille between the grid slag;
2. Textile, printing, dyeing, slaughtering, leather, paper making industrial wastewater solid-liquid separation;
3. Sugar, wine, food processing of solid-liquid separation.

 

Working principle

This grille machine mainly consists of engineering plastic, nylon or stainless steel special shape, press the certain harrow tooth gear assembly rankings formed on the shaft gear chain, the closed-end rake in the lower installation in water into the canal. When driving system drive sprockets more uniformly and directional spin, the whole rake tooth chain and top- down movement, and bring a solid material from liquid isolated, fluid, through the rake the tooth of the gate, the whole working flow past band continuous state. Due to the special structure harrow tooth shape, make rake tooth chain carries sundry reach top retrorse motion before, back when the relative harrow tooth clear between campaign to get off, and sundry rely on gravity behind a pair of glue set equipment to ensure each row harrow tooth movement to this position can be thoroughly clean the brush role.

 

Product features:

This grille machine biggest advantage is a high degree of automation, high separation efficiency, power consumption is small, no noise, corrosion resistance, good performance in unmanned circumstance can ensure continuous stable work, set up overload safety protection devices, in equipment is at fault, will produce the acoustic alarm and automatic stop, can avoid equipment overload.

This equipment can according to user needs to arbitrarily regulate equipment operation, running, realize periodic intervals according to level difference before automatic control of geogrid; And a manual control functions, with convenient maintenance. Users can use either the work according to different selection.

Equipment specification according to machine 300-1500 width points type. Machine, then make it more than 1500mm wide and online. Bar gap 1mm, 3mm, 5mm into 10mm, 20mm, 30mm, 40mm, 50mm from various specifications, water, hoisting height had total, solid-liquid separation and the shape of separation material, particle size to choose bar gap. Can be based on user needs to choose material of engineering plastic, nylon, stainless steel production; the rake tooth main frame has stainless steel material and carbon steel corrosion two kinds.