Product Details

PEH type automatic sludge belt filter press

Products overview

Applying the leading dewatering technology in the transition dewatering section, the belt type filter press avoided the problem of sludge leaking from both sides of the belt when there is large volume of sludge. As the self-cleaning stainless steel nozzle is used for the washing system of the belt strainer, water from the secondary sedimentation tank could be used for washing. Dirt in the nozzle will be clean by itself, operation cost will be lowed.

The belt filter press has a well anti-corrosion perfomance. All its fasteners are made of stainless steel. It is equipped with the autolmatic unit for anti-deflection of belt strainer as well as the pressure regulation unit.Both sides of the belt strainer are designed for anti-deflection.The sludge feeding volume, belt tension, belt speed and dosage of the filter press can be adjusted according to the customers specifications so that its productivity and dewatering rate could meet the optimum state.

The belt filter press has been widely used in different types of wastewater treatment. Ihahas a unique desigm of multi-stage dewatering. The sludge cake produced has a low water content ratio. This equipment can run continually with low revolution speed and high effciency. It is also easy and safe to operation.

Operation principle

Sludge enters belt strainer from hopper. The moisture is squeezed out of the sludge through extrusion of the belt strainer and the roller wheel.

The working process of belt filter press consists of four phase

Pre-treatment: sludge thickening by gravity for increasing sludge concentration and reducing volume. Sludge is mixed with folcculation agent to form floc and is settled.
Gravity dewatering: the pre-treated sludge is then fed to the belt strainer of the filter press. The water is filtered out of the belt by gravity.
Wedge dewatering:: following the gravity dewatering, sludge enters to the wedge section for dewaetring. After the above two stages, the sludge has lost its fluidity and is teady for the pressing dewatering.
Roller pressing dewatering: sludge is excluded by different rollers repeatedly to become sludge cakes with low water content ratio, and then will be discharged to the outlet aubomatically.

Performance parameter

Specs	Size LWH(mm)	Belt width (mm)	Capacity (m3/h)	Power (Kw)	Speed (m/min)	Washing Water Consumption (m3/h)	Hydraulic Pressure (Mpa)	Air Pressure (Kpa)	Moisture conternt of the sludge cake(%)
PEH-500	4000836(1240) 1500(1950	500	2.5-5	1.1	1.5-7	6	0.3-0.7	≥0.4	70-80
PEH-600	4000936(1340) 1500(1940)	600	3.5-5	1.1	1.5-7	6	0.3-0.7	≥0.4	70-80
PEH-750	40001086(1490) 1500(1950)	750	3.5-6	1.1	1.5-7	6	0.3-0.7	≥0.4	70-80
PEH-800	40001136(1540) 1500(1950)	800	4-7	1.1	1.5-7	6	0.3-0.7	≥0.4	70-80
PEH-1000	40001336(1740) 1500(1950)	1000	5-8	1.1	1.5-7	14	0.3-0.7	≥0.4	70-80
PEH-1200	40001536(1940) 1500(1950)	1200	6-10	1.1	1.5-7	14	0.3-0.7	≥0.4	70-80
PEH-1500	40001536(1940) 1500(1950)	1500	6-10	1.1	1.5-7	14	0.3-0.7	≥0.4	70-80
PEH-2000	45002370(2700) 1900(2400)	2000	10-16	2.2	1.5-7	18	0.3-0.7	≥0.4	70-80

Our service

Operation instruction will be offered by telephone or e-mail if you need.
Technicians also can be arranged to help set up your project.
Data sheet will be sent to you if you need.

If you have any question, please tell us, we will do our best to help you!

We are professional manufacturer of various bar screen machine, wastewater treatment equipment, filter press, belt filter press, vacuum filter, dissolved air floatation etc, and can supply you the most cost-effective products with best price!

Belt filter press machine with good quality