Specifications

1 production speed: 200 m/min
2 qualification rate : 99.9%
3 sold to Canada Pakistan Malaysia Nigeria Iran

FULL SERVO MATERNAL UNDER PAD MACHINE

1 Technical parameters:

Designed speed: 220 M/Min

Real production Speed: 200 M/Min

Product size: L: (350-1500)mm x W(300-900)mm

Qualified rate: 99.99% (The rate is compared with qualified products with gross output products within7.5 hours)

Efficiency: ≥90%(The rate is compared real output with principle output within 7.5 hours)

Installed capacity: 200KW(Including hot melt system)

Practical capacity: 140KW(Including hot melt system)

Electric power supply: Three-phase & four-wire 380V/50HZ(Ground wire)

Electric wire: 3x95mm2+1x25mm2+1x16mm2

Air compressor: >0.6Mpa, 1.8m3/min

Weight: about 70T

Noise: <85dB(A)

Machine size: (25x8x4)M

Working size: (29x10x5)M

Container: 3x40HQ+1x20GP

2. FUNCTIONS&FEATURES

Single drum former device. Crusher can take both treated and untreated fluff pulp.

Fluff pulp feeding is controlled by servo motor. Or air laid paper can be used instead of fluff pulp to produce high quality pads.

SAP feeding device. SAP is added mixed with fluff pulp and controlled by servo motor. If use air laid paper to instead of fluff pulp, then SAP feeding device can be used as spare device.

Tissue paper double sides feeding units. If use air laid paper to instead of fluff pulp, then tissue paper is unnecessary to use.

Net shape pressing device. Cylinder pressing.

Fluff core or air laid paper position adjusting device

Fluff core or air laid paper cutting device. Cylinder pressing.

Bottom film and top sheet materials feeding unit , Glue adding and fixing shape by pressing.

Pad vertical folding

Wastes rejection device

Pad crosswise folding

Auto-counting and arrange coming out. (The main machine can link with stakcer machine to do automatic packing .)

3. SCHEME LIST

Name	Unit	Quantity	Brand	Country of Origin
servo motor	set	44	A.B or Siemens or Mitsubishi	Germany or Japan
web guide	set	4	FIFE or BST	USA or Germany
touch screen	set	1	Siemens or Mitsubishi	Germany or Japan
PLC control system	set	1	Siemens or Mitsubishi	Germany or Japan
sensor	set	24	Sick,Omron,Delixi	European or Japanese
safety protection-phase switch,stay wire switch	set	30	Schmersal	Germany
hot melt applicator	set	3	ITW or Nordson	USA
material of cutter D2	set	3	A.finkl	USA
bearing(according to use)	set	1	BEM/NSK/SKF	Germany/Japan/Sweden
timing belt	set	1	optibelt/gates	Germany/USA
low-voltage electrical equipment	set	1	Schneider	France
electric connect terminal	set	2000	Phoenix Contact	Germany
pneumatic component	set	1	SMC	Japan
solenoid valve	piece	40	SMC	Japan
water content segregator	piece	1	SMC	Japan
failure automatic warning	set	1	Mitsubishi	Japan
planet speed reducer	set	4	VGM	Taiwan China
motor	set	14	Siemens	Germany
automatic rejection system	set	1	Our company	Our company
dust recycle system	set	1	Our company	Our company
waste recycle system	set	1	Our company	Our company
safety protect system	set	1	Our company	Our company
raw material loading and unloading davit arm	set	1	Our company	Our company
raw material outer-fixed system	set	1	Our company	Our company
cotton core wheel forming unit	set	1	Our company	Our company
SAP feeding unit,quantity can be adjusted	set	1	Our company	Our company
cotton core press embossing	set	1	Our company	Our company
bottom tissue feeding unit	set	1	Our company	Our company
cotton core cutting	set	1	Our company	Our company
bottom PE film feeding,automatic unwinding	set	1	Our company	Our company
top layer,absorb cotton core,back sheet complex pressing	set	1	Our company	Our company
urgent stop	piece	7	Our company	Our company
products length folding and pressing	piece	1	Our company	Our company
products final cutting	set	1	Our company	Our company
products tri-folding	set	1	Our company	Our company
products output	set	1	Our company	Our company
pulp feeding unit with frequency controller	set	1	Our company	Our company
main materials automatic run,auto connection unit	set	4	Our company	Our company
tension control	set	4	Our company	Our company
products output in a line	set	1	Our company	Our company
stacker with 2 exits	set	1	Our company	Our company

4. OUR PROMISE

1, we can customize the production line, as per customers' requirements.

2, our whole set of components are all imported from overseas.

3, within one year, all components are free to replace when wrong since the day of installation.

4, engineers available to service machinery overseas.

5, we can supply raw materials for your production.

5. PICTURES