Product Details

Title goes here.

Salt Spray Environmental Test Chamber For Sale adapted to the surface treatment of various materials, including paint, electroplating, organic and inorganic coating, after these anti-corrosive treatment to test the corrosion resistance of their products.

Model	FLR-201
Inner Box Size (L×W×H)	600450400mm
Outside Box Size(L×W×H)	710560560mm
Equipment Material	Both inside & outside shell adopt imported P.V.C rigid plastic board, and tank cover uses imported transparent P.V.C. rigid plastic board
Temperature Range	35°C~55°C
Temperature Fluctuations	Temperature Uniformity
Temperature Fluctuations	≤±0.5°C
Temperature Uniformity	≤±2°C
Temperature Precision	±1°C
Brine Temperature	35°C±1°C
Spray Quantity	1.0~2.0 ml / 80cm2 / hr
Test Chamber Temperature	Salt Spray Method (NSS ACSS)35±1°C Corrosion-resistant Testing Method(CASS)50±1°C
Saturated air Barrel Temperature	Salt Spray Method (NSS ACSS)47±1°C Corrosion-resistant Testing Method(CASS)63±1°C
Lab Volume	60L
Brine Tank Capacity	15L
Power	AC220V,10A

Structure

1. The Salt Spray Chamber cover is made of transparent materials so that the operator can see the tested sample in the chamber and the spraying situation of the tested sample.
2. A waterproof structure is adopted between the chamber cover and chamber body and thus there is no salt spray overflow.
3. Adopts the tower spraying system and equipped with the salt solution filter system and non-crystal nozzle so as to realize even salt spray distribution and freely adjustable settlement.

Maintenance Procedure:
1. Ensure the test quality, please replace the glass nozzle periodically within 4500 hours.
2. Clean the inner of the chamber and release the water in heat sink if a longer time interval from the next test.Release the water from heat sink:open the drain value.Release the water from isolation tank:pulled up the middle silicone plug.Release the water from preheat tank:Pull out the internal silicone plug.
3. Don’t use the salt solution if unused for a week, avoid affecting the test quality.
4. Change the heat sink water if the test period over one month.