Biomass pellet mill 

Biomass pellet mill Seven characteristics:

1. Vertical feeding directly in place.

2. Die static, roller rotating, materials centrifugal, evenly distributed around.

3. Double-layer dies, up and down dual-use, reduce the cost, enhance the efficiency, can be dual-use, high capacity, energy saving.

4. One die, different hole diameters, with different specifications to pelletize.

5. Macroporous die, wire joining circular tube, increasing travel, improving density.

6. Ring die, vertical structure and good for cooling the pelletizing room.

7. Independent and frequency conversion discharge device, to ensure that the rate of pellet formation.

II. Four differences of biomass pellet mill

1. Upward mould, special structure, vertically feeding, easier heat dissipation: The material is put into the pelletizing room vertically and is well placed, no other pressing device is needed. The feed inlet of ring die pellet mill is set in one side, so light material is hard to get into the pelletizing room and other special force pressing device is needed, what's more important, the lifetime of gearing(gear, bearing) is shorten as the pelletizing room couldn't dissipate the heat and be cooled. Flat die pellet mill has two structures, but both have many disadvantages that are hard to get rid of even they can be feeded vertically.

(1) Die rotates to make rollers run, the output will be effected as material is easily arched which lead to uneven feeding.

(2) our pellet machine when the rollers rotate while the die is static, which could avoid the arching of material, but centrifugal force is caused which will swing the material in the pelletizing room to the periphery. And that will cause the upward flat die with evenly distributing pellet holes in it has no material to press in the center, then material piles up unevenly in thickness.

2. Biomass pellet mill die static, roller rotating, material centrifugal and distributed around evenly: Using a unique double-layer high rebounding-effect die, naturally and evenly distribute in the dies inner surface. Normally ring-die pellet mills rollers are static, die rotates, no centrifugal force, unevenly distributed material. Normally flat-die pellet mills rollers rotate to generate centrifugal force, but the die hole is inconsistencies with the material force.

3. Biomass pellet mill double-layer dies, multi-function, high efficiency: Die has upper parts and lower parts, can choose two different specifications of aperture, to produce two different specifications of pellet. When pelletizing good bonding materials can heighten the rollers and two-layer dies to reach four-fold capacity. No flat die, ring die can do this.

Biomass pellet mill parameter:

Shan dong chang sheng construction machinery co.,ltd  is a relatively early timber mill equipment business, production of large and medium-sized wood processing machinery, products mainly for timber mill, wood chipper, wood flour machine, straw molding machines and other machinery and equipment for wood. Company scientific research, processing, manufacturing, sales, ecological environmental protection as the theme. The total sales volume and the indicators rank the forefront of the industry, with many years of production history, with the most modern management system, first-class processing equipment, improved detection methods, high-quality scientific and technological personnel, quality after-sale tracking service.

The company is committed to promoting energy reform institutions, conserve resources, save energy, improve our living environment, improve air quality, industrial and agricultural solve coal, fuel shortage has opened up a new path.

 The company has a sound marketing system and after-sales service system to ensure that each customer will arrive in high spirits and satisfied. The adoption of traditional offline sales combined with the network online sales, operating tracking service to ensure that the interests of customers.

We always adhere to the "golden quality, as good as gold" business philosophy to high-quality product quality and good after-sales service and dedication to customer service. Welcome new and old customers and friends to plant negotiate work.

 1 What is the suitable moisture of material that to be granulated?

-The mositreu shoudl be controled under 20%.

2How long is your guarantee?

-One year. We shall supply free exchenge for spare parts except the easy wear parts. After this period, we shall chargeat low cost to keep after service. You will be welcome to contact us with any problem migh occured. 

3 Will you send engineers to install the plant?

-Yes, overseas engineer service is available when needed. 

4 What international certificae we have?

-Our company has passed ISO9001-2008 quality certificaiton, SGS qiality certification, CE safety and quality certification of EU.

5 How can we guarantee the quality of machines?

-Our company promised that the material thickness of our main equipments is greater thant the feed machinery industry standard 2 times. 

6 Are you a trading company or a manufacture?

- We are a manufacture, which has alsomst 10 years experince in this industry. We chang sheng is located in the jinan city which is famous for spring city. Warmly welcome to visit our factory if your time permitted!

7 Will you send engineers to install the plant?

-Yes, but an extra cost payable by the customer. Or you can get local contractors to do the commissioning and we send one supervising engineer.

8 What service we can supply?

-In pre-sales we provide users with comprehensive technical support. We provide comprehensive customer training, including in charge of the procedures, operating procedures, maintenance procedures, equipment, general maintenance, equipment, long-term hazard assessment knowledge and so on. Before the users buy our equipment, they must come to our company to accept a series of training. After the examination for equipment operation personnel, we will issue husbandry machinery operation qualification certificate. We suggest user to set up the remote control system. Our company after-sales service can guide the user through the remote control system for regular maintenance equipment key parts. Our aim is: to do a responsible enterprise, let customers safely use the best feed machinery!

Why the client choose us, because :
 

1 One of the largest manufacture of the pellet machine lines in chian
2 The earliest manufacture of pellet machine in china with rich experience, get the ISO certificate and SGS certificate.
3Every machine will be test before delivery and we will send the test video and other related video to our client.
4All the motor of the machine with CE certifiacte.
5Product quality get the locak goverment guarantee
6Recommend clients for free, offer the layout drawing and the profit table.
7 Offer the install video and free stuff training.
8 We hope sincerely to become your chinese supplier and partner in the mechanical filed.

Production inspection:

Our quality department has rountine inspeciton to ensure the products are in compliance with the standards set by customers and regular inspection throughout the manufacturing process.

-Inspection of raw material before any produciton begins
-Pre-produciton samples to ensure specification meet customers' requirements.
-In process to confirm that standards are maintained.
-Pre-shipping to ensure that the products arrives to the customer exactly as expected and is packed correctlry to prevent any damage in transit.

1 we guarantee that the products we supplied to you are manufactured accoring to best proprietary technology followed by our quality control procedures. We guarantee that all products we supplied to you have met our products quality specificaiton.

2 We commit to you that our technical service in the us and switzerland will be available to answer you questions within24 hours. Our service engineer through our distributor in shanghai will be on site within 72 hours to resolve performance problem if encountered.

3If needed, service engineer from our company can provide on site loadking and start up assitance to meet your desired design performance. If requrest, we can also porvide on site service engineer from us with our standard service and travel charges.