Stainless Steel Wire Mesh Cylinder Filter
USD $1.75 - $8.2 /Square Meter
Min.Order:100 Square Meters
Anping County Baiyi Metal Wire Mesh Products Co., Ltd.
Stainless Steel Wire Mesh Cylinder Filter
Production of stainless steel wire mesh cylinder
1.Stainless Steel wire mesh cylinder filter Opening:
Stainless Steel Square Wire Mesh produced by Ante is classified into plain weave, twill weave, dutch weave.
2.Stainless Steel wire mesh cylinder filter Plain weave
most commonly used weave. Each warp wire crosses alternately above and below each weft wire. Warp and weft wires generally have the same diameter.
3. Twill Weave Stainless Steel Wire mesh cylinder filter
made by each weft wire passing alternately over two, and then under two successive warp wires and each warp wire passing alternately over two and under two successive weft wires. It is possible to be used to allow a heavier than standard wire diameter.
4. Stainless Steel wire mesh cylinder filter Size
Standard roll width of stainless steel wire mesh : 1m to 48"
Standard roll length of stainless steel wire mesh: 30m to 100"
Stainless Steel Wire mesh cylinder filter | ||
Mesh/Inch | Wire Gauge SWG | Aperture mm |
40meshx40mesh | 36 | 0.44 |
50meshx50mesh | 38 | 0.36 |
60meshx60mesh | 40 | 0.30 |
80meshx80mesh | 42 | 0.21 |
100meshx100mesh | 44 | 0.17 |
120meshx120mesh | 44 | 0.13 |
150meshx150mesh | 46 | 0.108 |
160meshx160mesh | 46 | 0.097 |
180meshx180mesh | 47 | 0.09 |
200meshx200mesh | 47 | 0.077 |
250meshx250mesh | 48 | 0.061 |
270meshx270mesh | 48 | 0.058 |
300meshx300mesh | 49 | 0.054 |
325meshx325mesh | 49 | 0.051 |
350meshx350mesh | 49 | 0.042 |
400meshx400mesh | 50 | 0.0385 |
|
6.Characteristics:Acid-resisting, alkali-resisting, heat-resisting and wear- resisting.
7.Packing of stainless steel wire mesh cylinder filter
8.Stainless Steel wire mesh cylinder filter in container
We are factory of stainless steel wire mesh cylinder filter!
Sincerely welcome your visiting and inquiry!