Specifications

stainless steel fabrication
1.material:SUS 304,306,316
2.wire diameter:0.02mm-2.50mm
sh:2-400

Stainless Steel Fabrication 

1.hardware cloth:
Stainless Steel Square Wire Mesh produced by Ante is classified into plain weave, twill weave, dutch weave.

2.Hardware Cloth Plain weave

most commonly used weave. Each warp wire crosses alternately above and below each weft wire. Warp and weft wires generally have the same diameter.

3. Twill Weave Hardware Cloth

  made by each weft wire passing alternately over two, and then under two successive warp wires and each warp wire passing alternately over two and under two successive weft wires.

4. Hardware Cloth Uses

Stainless steel wire mesh screen products are widely used in petroleum, chemical industry, environment protection, mine, airspace, paper-making, electronic, metallurgy etc.

 

 

5. Hardware Cloth Sizes
Standard roll width of stainless steel wire mesh : 1m to 48"
Standard roll length of stainless steel wire mesh: 30m to 100"

Stainless Steel Wire Mesh
Mesh/Inch	Wire Gauge SWG	Aperture mm
40meshx40mesh	36	0.44
50meshx50mesh	38	0.36
60meshx60mesh	40	0.30
80meshx80mesh	42	0.21
100meshx100mesh	44	0.17
120meshx120mesh	44	0.13
150meshx150mesh	46	0.108
160meshx160mesh	46	0.097
180meshx180mesh	47	0.09
200meshx200mesh	47	0.077
250meshx250mesh	48	0.061
270meshx270mesh	48	0.058
300meshx300mesh	49	0.054
325meshx325mesh	49	0.051
350meshx350mesh	49	0.042
400meshx400mesh	50	0.0385

6.Characteristics:Acid-resisting, alkali-resisting, heat-resisting and wear- resisting.

7.Packing of hardware cloth 

8.hardware cloth loading in container

Sincerely welcome your visiting and inquiry!