Specifications

Urea pump115V-230V for IBC systems
1Continuous working with low temperature
2)Max flow:30~50LPM
3)Pressure max: 25PSI

 

    Urea pump115V-230V for IBC systems     

  

 

specification:  

 

PUMP Design:   5 chamber diaphragm

Motor Design:   Permanent magnet DC

Voltages:       12, 24VDC/115V,230VAC

Pump Body:     Aluminium

Diaphragm: Viton    

Check valves: Viton

Max. Flow Rate:   30lpm~50lpm

Max. Pressure:   25PSI (2BAR)

Liquid Temp:     40°F (5°C)MIN;  140°F (60°C)MAX

Duty cycle:     Continuous work with self-priming

Gross Weight:        5.5kg per DC pump    6.5kg per AC pump

Certifications: CE

Port Size inlet/ outlet: 3/4”  1''

 

AC Model:

 

DC Model:

  

DC AC industrial ablue pump Technical data:

 

 

DC MOUNTING

  

The HV Series pumps are self-priming and may be located above or below the water supply in a dry location. To vertically mount these units, it is best to do so with the motor on top. This will prevent water dripping on the motor in the event of a leak. Place pump on a solid surface and secure with four mounting screws; be careful not to compress the rubber grommets, which act as vibration dampers.

 

 

 

 

  

PRODUCING LINE: