Specifications

acid transfer pump
1.Continuous working
2.with low temperature
3.Pressure :40psi
4.Long serivce life,

Singflo adblue pump

 

 Adblue pump SPECIFICATION

 

PUMP Design:   5 chamber diaphragm

 

Motor Design:   Permanent magnet DC/AC

 

Voltages:       12, 24VDC,115/230VAC

    

Pump Body:     Aluminium

 

Diaphragm: Viton

 

Check valves: Viton

 

 

Max. Flow Rate:   30~50LPM

 

Max. Pressure:   40PSI (2.75BAR)

 

Liquid Temp:     40°F (5°C)MIN;  

 

140°F (60°C)MAX

 

Duty cycle:     Continuous work with self-ventilated

 

Weight:        5.5KG for DC pump  6.5KG for AC pump

 

Certifications: CE

 

Port Size inlet/ outlet: 3/4”  1''

 

 

 

 

Adblue pump techniocal data:

Model	Volts	Open Flow	Pressure	Amps	Speed	N.W / G.W
	DC /AC	LPM	Shut Off	(A)	(RPM)	(KGS)
HV-30A	12 VDC	30-35	40 psi (2.8 bar)	15	2800	5 /5.5
HV-30B	24 VDC	30-35	40 psi (2.8 bar)	7.5	2800	5/5.5
HV-30S	115 VAC	30	40 psi (2.8bar)	4	3400	6 / 6.5
HV-30M	230 VAC	30	40 psi (2.8bar)	1.5	2900	6 / 6.5
HV-40S	115 VAC	40	40 psi (2.8bar)	4.2	3400	6 / 6.5
HV-40M	230 VAC	40	40 psi (2.8bar)	1.8	2900	6 / 6.5
HV-50S	115 VAC	50	40 psi (2.8bar)	4.5	3400	6 / 6.5
HV-50M	230 VAC	50	40 psi(2.8bar)	2	2900	6 / 6.5

 

• Permanent magnet and continuous duty
• Built-in pressure switch automatically starts and stops
• Pump when faucets is opened
• Self-priming 3m so pump can be located above water tank
•  Runs dry for extended periods of time without damage
• Hold excellent motor keep stable temperature of pump body

 Adblue pump DC MOUNTING:

  

The HV Series pumps are self-priming and may be located above or below the water supply in a dry location. To vertically mount these units, it is best to do so with the motor on top. This will prevent water dripping on the motor in the event of a leak. Place pump on a solid surface and secure with four mounting screws; be careful not to compress the rubber grommets, which act as vibration dampers.

 

Adblue pump AC assembled:

 

 test machine:

CE Certificate :