Palm oil extraction plant machinery manufacturer

The material of oil extraction machine :

Cottonseed oil ,Palm cake,Peanut oil,Rapeseed oil,Ricebran oil,Sesame oil,Sunflowerseed oil,Tea seed oil,Vegetable seed oil and so on.

The feature of palm oil extraction plant machinery :

01. Adopt stainless steel fied grid plate and increase the horizontal grid plates, which can prevent the strong miscella from flowing back to the blanking case, so as to ensure good etraction effect;

02. The rotocel etractor is driven by rack, with unique rotor of balanced design, low rotating speed, low power, smooth operation, no noise and quite low maintenance cost;

03. The feeding system can adjust the rotating speed of airlock and main engine according to the feeding quantity and maintain a certain material level, which is beneficial to the micro negative pressure inside the etractor and reduce the solvent leakage.

04.The advanced miscella circulation process is designed to reduce the fresh solvent inputs, reduce the residual oil in meal, improve the miscella concentration and save energy by reducing the evaporation capacity.

05. The high material layer of the etractor helps to form immersion etraction, reduce the meal quality in miscella, improve the quality of crude palm oil and reduce the evaporation system scaling.

06. Specially suitable for the etraction of various pre-pressed meals.

The parameter of 300TPD palm oil extraction plant machinery :

The process of palm oil extraction plant machinery

(1) The palm oil (for pretreatment) is sent to rotary etraction by the scraper conveyor. The palm oil will extracted by the solvent or mi oil. After this step, we will get meal and mi oil

(2) Meal is send to toaster. Through the toaster, the solvent in the meal will seperate from the meal. The solvent goes to condenser and is recycled to rotary extraction.

(3) After the mi palmoil from the rotary etraction enters into 1st evaporator and 2nd evaporator, most of the solvent in the cotton seed oil is separated.

(4) The mi palm oil from 2nd evaporator goes to stripping tower and almost all the solvent is separated. From the stripping tower, we can get crude palm oil and solvent. The solvent is sent to condenser and is recycled to rotary extraction.

The design drawing of palm oil extraction plant machinery :

We have customs all over the world:

Our honor should be more convincing: