Cottonseed cake oil extractor
USD $30 - $300,000 /Set
Min.Order:1 Set
Zhengzhou Qie Grain And Oil Machinery Co., Ltd.
Cottonseed cake oil extractor
The feature of cottonseed cake oil extractor
1. Adopt stainless steel fixed grid plate and increase the horizontal grid plates, which can prevent the strong miscella from flowing back to the blanking case, so as to ensure good extraction effect;
2. The rotocel extractor is driven by rack, with unique rotor of balanced design, low rotating speed, low power, smooth operation, no noise and quite low maintenance cost;
3. The feeding system can adjust the rotating speed of airlock and main engine according to the feeding quantity and maintain a certain material level, which is beneficial to the micro negative pressure inside the extractor and reduce the solvent leakage.
4. The advanced miscella circulation process is designed to reduce the fresh solvent inputs, reduce the residual oil in meal, improve the miscella concentration and save energy by reducing the evaporation capacity.
5. The high material layer of the extractor helps to form immersion extraction, reduce the meal quality in miscella, improve the quality of crude oil and reduce the evaporation system scaling. 6. Specially suitable for the extraction of various pre-pressed meals.
The paratemer of cottonseed cake oil extractor
Capacity | 300T/D |
Residual oil in meal | 1% (soybean) |
Solvent consumption | 2Kg/T (No.6 solvent oil) |
Crude oil moisture and volatile matter | 0.30% |
Power consumption | 15KWh/T |
Steam consumption | 280KG/T (0.8MPa) |
Finished meal moisture | 13% (adjustable) |
Residual solvent in finished meal | 300PPM (qualified detonated eperiment) |
The process of cottonseed cake oil extractor
(1) The edible oil (for pretreatment) is sent to rotary extraction by the scraper conveyor. The rice bran oil will extracted by the solvent or mi oil. After this step, we will get meal and mi oil
(2) Meal is send to toaster. Through the toaster, the solvent in the meal will seperate from the meal. The solvent goes to condenser and is recycled to rotary extraction.
(3) After the mix plant oil from the rotary etraction enters into 1st evaporator and 2nd evaporator, most of the solvent in the rice bran oil is separated.
(4) The mi plant oil from 2nd evaporator goes to stripping tower and almost all the solvent is separated. From the stripping tower, we can get crude plant seed oil and solvent. The solvent is sent to condenser and is recycled to rotary extraction.
The design drawing
We have customs all over the world:
Our honor should be more convincing:
Attn: Tom
Website:
Phone: +86-15515901135
Skype: Luyachao819
Whatsapp/viber/tango: +8615515901135
If you want to learn more or purchase equipments, please contact me.