Extruding machine

the double screw rod extruding machine makes the grain machine Details:

1.uses in to produce the calcium carbonate parent material,

2.to gather the lactic acid parent material,vegetable fiber parent material,for 200-250 kilogram/hour.

3. including water cuts the system modular surface forced-air cooling hot system,to match the high speed mixer.

Unit Name:  TE65 * 40:1 twin-screw extruder

Air-cooled die face pelletizing means fervent, water-cooled brace

Production capacity of 200-400kg / h (depending on materials and formulations systems vary)

Specifications

1. Twin-screw Nominal Diameter: 62.4mm

2. Twin-screw center distance: 52mm

3. Twin Screw Max Speed: 55r/min

4. Twin-screw job Aspect Ratio: 40:1

5. Twin-screw host driving power: 55Kw

6. Twin-screw host center height: 1000mm

7. Twin-screw Host Size: 4700 * 720 * 2100

8. Twin-screw Host Weight: ~ 3000 KG

9. Group capacity: 200-400kg / h

10. Unit Total power: ~ 160KW

Function and structure Introduction

First, the host part of the twin-screw

1. AC motor: power 15KW, speed 146r/min, for mainframe power.

2. Couplings: Connect motor and reducer distribution box components.

3. Deceleration distribution box: output speed of 60 ~ 600r/.min, whose role is to slow down and distribution of torque. Deceleration distribution box structure diagram

4. Lubricating oil system: achieving the cooling of the lubricating oil, gear and bearing lubrication.

Motor Type: Y90S-4

Motor Power: 1.1KW

Pump Model: CB-B16

5. Main Feeder: twin-screw feeder. Its role is to be measured by the added material.

         Twin-screw feeder parameters are as follows:

        Feeding models: twin-screw feeder

        Nominal Screw Diameter: 44mm

       Screw center distance: 38mm

       Motor Power: 1.1Kw

       Reduction ratio: 17

6. Cylinder screw: distribution box reduction achieved by coupling two pairs of screw drivers, screw in the cylinder body rotation to achieve the delivery of materials, melting, cutting, mixing. Cylinder screw factory structure

Tube structure in the device before delivery of materials have been processed according to the user of the portfolio and installed, users do not need to change their structure. Screw structure on the device before delivery of materials have been processed according to the user of the portfolio and installed, the user in the production process Section, based on the needs of variety of techniques and materials, structural forms of the screw to adjust.

7. Heating system: If you drive, the heating system for heating cylinder and screw, to process and set the temperature: the process of generating units in operation, through the role of temperature control instruments to achieve automatic control of temperature.

       Host Heating Total power: ~ 12Kw

 The paragraphs heating power as follows: Unit: KW