Specifications

Disc Fertilizer Granulating Machine
1.High granulating rate
2.Homogeneous grain
3.High strength
4.ISO9001-2008.CE

Disc Fertilizer Granulating Machine/Disc Type Granulator Making Machine:

 Introduction of Disc Fertilizer Granulating Machine

The disk angle of the  Disc Fertilizer Granulating Machine is arc and its granulating ratio is over 93% 
which is higher among all types of fertilizer granulator The fertilizer granulating machine has 
3 mouths that are used to discontinuously produce fertilier granules, which reduces 
labor intension and improve labor efficiency. The bottom of the disk/ Pan Fertilizer Granulator is supported by several armor plates solidly. The  Disc Fertilizer Granulating Machine is the best choice for your requirement to make organic fertilizer granules with raw materials of chicken manure,sheep manure, cattle manure,human waste and so on. But if you would like to make NPK compound fertilizer, using rotary granulator is the best choice for you.

Working principle of Disc Fertilizer Granulating Machine

 

 

Adjust the balling disc between 40 ° -55 ° angle. Raw material powder in a fertilizer mixer is evenly moistened by atomized water , then delivered the raw materials into the fertilizer pan granulator. The raw materials moisture should be controlled at 20 to 30%. The materials powder are added directly into the disc fertilizer granulating machine, and pan granulator will rotate in specific speed . Due to adhesion and plasticity of the material, the pellets bond with each other and grow up gradually in the course of the campaign.

Raw materials for Disc Fertilizer Granulating Machine

 

Raw materials for making organic fertilizer can be animal manure like chicken manure,sheep manure,cow manure, organic waste, straw meals,grass meals,human waste and so on. Beside you can also add some micro element like compound materials. the fertilizer pan granulator require the moisture is 20--30%,if it is above this, using our new design organic fertilizer pellet making machine is best choice.

Technical Parameter of the Disc Fertilizer Granulating Machine

Specification (m)	Rotation speed of disk (r/min)	Capacity(t/h)	Power(kw)	Adjusting range of disk gradient	Dimensions( m )	Weight (kg)
Ø2.2	14.25	4-8	7.5	35-55	2.8*2.75*2.58	2850
Ø2.5	11.81	5-10	7.5	35-55	3.2*2.3*3	3250
Ø2.8	11.21	12-16	7.5	35-55	3.4*2.6*3.1	3710
Ø3.0	11.3	15-18	11	35-55	3.7*2.7*3.3	4350
Ø3.2	9.6	15-20	11	35-55	3.9*2.7*3.4	5110
Ø3.6	9.1	18-24	15	35-55	4.3*3.1*4.0	6510

 

 

remarks:the complete fetilizer production line are including in following equipments