Specifications

Dividing Head
*Dividing Head can divide in any angle by the direct, in-direct, or different methods.

Semi-Universal Dividing Head(Dividing Head)

 

Type	A	B	H	h	a		b	g	Taper of Center	Diameter of Spindle Hole	Weight
MT0500-	189	140	173	100	160		91	13	MT-2	18	20kgs
004-BS-0	7 7/16	5 3/64	6 13/16	3 15/16	6 19/64		3 37/64	33/64
MT0500-	293	156	220	128	207		114	16	MT-3	20	33kgs
004-BS-1	11 17/32	6 9/64	8 21/32	5 3/64	8 5/32		4 31/64	5/8

 

				mm/inches
Type	A1	B1	H1		h	a1	b1	g1
MT0500-	167	80	107.5		100	130	92	13
004-BS-0	6 37/34	3 5/32	4 15/64		3 15/16	5 1/8	3 2/8	33/64
MT0500-	191	88	137		128	150	108	16
004-BS-1	7 33/64	3 15/32	5 25/64		5 3/64	5 29/32	4 1/4	5/8

*The swivel head can be locked of any angle from 10° below horizontal to 90° vertical-precision fitting to base assures smooth rotation. *All models have threaded spindle nose and 24 hole dividing plate with easy conversion to fast direct indexing on numbers 2, 3, 4, 6, 8, 12, and 24. *Easy indexing of all numbers from 2 to 50 and many numbers from 52 of 380. Model BS-2 is also equipped for different indexing for all numbers from 2 to 380, and for spiral cutting.

*Dividing Head can divide in any angle by the direct, in-direct, or different methods. The ratio between the warm and the warm gear is 40:1.
*Hardened and ground spindle is rigidly held in a taper roller bearing. Worm is hardened and ground also.