Item: Automatic Drilling & Tapping Machine (MW2500-016)

Features

• This drill & tapping machine can use normal straight or oblique handle drill bit to drill holes as well as tapping bit to tap thread
• Working table is an electronic magnet to efficiently attract and release work-piece
• All the drill sleeves and tap fixtures are with rapid-adaptors convenient for fast replacement of cutters
• Tapping adaptors are with torsion control to prevent tap bits from being twisted off
• The ideal design of the Forward/Reverse switch handle makes tapping operation efficiently and can even tap on the high hardness steel

Description

• The rotation speed of our drill press machine can be changed quickly during running to make operation more convenient
• Available to be installed with revolving cutters table for fast replacement of cutters
• The motor is designed with circuit breaking protection 
• For Auto-Feeding, this machine comes with three feeding rates and drilling force control unit as well
  •  1) Three feeding rates are available: 0, 0.15 or 0.25. Please select the suitable one according to the size of drill bit and material of work-piece for drilling
  •  2) When drill bit is worn out, this unit will drive feeding intermittently or stop feeding. Once feeding becomes hard to make a hole, please be sure to replace a new drill bit or re-sharpen the worn out one in order to prevent the drilling tool and machine body from being damaged
• For breaking chips, this machine comes with 3 intermittent breaking rates:
• To perform Auto-feeding operation, please choose proper feeding rates according to different drill bits and material so that can discharge chips easily
• Compliant with CE standard (Optional) 

Specification

• Drill Capacity: 1/4"~1-1/4" (6~32mm)
• Tapping Capacity: 3/8"~1-1/8" (10~30mm)
• Power: 220V/230V, 3-Phase, 2HP
• R.P.M.: (H) 756 / 456 / 303 (L) 186 / 127 / 51
• Feeding Stroke: 100mm
• Body Stroke: 150mm
• Distance of Spindle End to Base Plate: 1000mm
• Distance of Spindle End to Table Top: 630mm
• Diameter of Column: 102mm
• Diameter of Table: 420mm
• Base Working Area: 600 x 360mm
• Table Stroke: 480mm
• Height: 1590mm
• Fittings Weight: 8kgs
• Machine Weight: 215kgs
• Standard Accessories: 
  • (1) Torsion Fixture Standard Fitting: 7pcs
  • (2) Drill Sleeve Standard Fitting: 3pcs
• The product pictures are for your reference only: final spec & accessories based on formal quotation

Our Services