Product Details

Specifications

Spreader with removable side walls!

N280/1 - 8t

Placed on a tandem-type chassis with leaf springs.
Equipped with a four-drum vertical adapter leaned towards the front which guarantees uniform and wide spreading of manure.
The drums run backward in pairs, and each of them is balanced in order to minimise vibrations of the spreader during work.
Replaceable, screwed-in teeth made of high-grade steel.
Easy hitching with tractors by the lower hitch with adjustment.
An overload friction coupling is used to protect the transmission.
To protect against spillage of material during transport, the machines are equipped with a hydraulically raised back hatch sealed with rubber blade as standard.
A chain synchronizer is used for smooth operation of the hatch.
A hydraulically opened mesh is used on the adapter's drums to ensure safety during transfer on public roads.
Opening and removable side walls facilitate loading and offer a wider range of uses on the farm.
The machine is controlled using a double-section hydraulic system (or a single-section system with Bowden cables which enables simultaneous connection of other hydraulically-controlled devices to the tractor, such as an optional front loader).
Large spreading width.
It is allowed to fill the load body up to 10 cm above the upper edge to fully use the spreader's load capacity when working with long-straw manure.
The spreaders have a 12 V electrical system.
Daily operation of N280, N280/1 and N280/2 manure spreaders is extremely simple.

Type	Unit	N280/1
Load capacity	kg	8000
Overall length	mm	6600
Overall height	mm	2800
Overall width	mm	2350
Loading space capacity	m³	8.95
Loading space length	mm	4132
Loading space height	mm	1100
Loading space width	mm	1970
Kerb weight	kg	3200
Permissible overall weight	kg	11200
Side panel sheet thickness	mm	3
Effective spreading width	mm	6000
Spreading width	mm	8000–10,000
Tractor power output	HP	80 minimum
Internal gate	-	Hydraulically actuated
Wheel system	-	Spring tandem
Hitch system	-	lower hitch
Vertical four-cylinder type adapter	-	standard
Adapter weight	kg	490
Floor conveyor drive	-	hydraulically driven with shift speed adjustment
Transport speed	km/h	30
Operating speed	km/h	2-10
Tyres	-	500-50/17 14PR
Tyre pressure	kPa	480
Support chocks	pcs.	2
Support foot	-	with wheel in standard
Axle base	mm	1010
Electrical system	V	12
Ladder	-	standard
Finger guard	-	mesh, hydraulic-powered lifting
Wheel track	mm	1790
Full top section	-	optional – 500 mm
Mesh top section	-	optional – 500 mm
Replaceable spreading vanes	-	standard
Box painting colour	-	Optional
Braking system	-	pneumatic-controlled service brake, two-line system; mechanically-controlled parking brake
Single-section hydraulic system	-	Optional
Hydraulic brake	-	Optional