Specifications

animal feed dryer
1.CE,ISO certification
2.high heating efficiency
3.Low energy consumption
4.High grade steel pipe

high capacity air stream type animal feed dryer for drying pellets abd powder:

 

Introduction for airflow animal feed dryer machine:

Airflow animal feed dryer machine is suitable for drying powdered and granular materials, such as starch, tapioca flour, gluten, flour additives, fish meal, distillers grains, corn gluten, grass, grass meal, titanium dioxide, activated carbon, sodium fluoride, fluorite mine, silica powder, synthetic resin, calcium phosphate, chlortetracycline, sodium silicate, dextrose, sodium sulfate, sulfide ore, phosphate rock, fused phosphate, ferric oxide, calcium carbonate, ilmenite, iron oxide , potato granules, tea meal, medicine, pharmacy, coal, wood saw powder. With a wide use, the airflow animal feed dryer machine is an ideal drying machine for the small and medium factories.

Features of airflow animal feed dryer machine:

1 dry ingredients after processed by airflow animal feed dryer machine: rice husk, sawdust and crushed foam flowers, branches, wood chips and other granular materials (diameter less than 3mm, length is less than 5mm).

2, the production efficiency of airflow animal feed dryer machine: when the hot air is 180 °C, relative humidity of 35% of the sawdust or rice hulls to a relative humidity of 10% and dried hot air temperature is not lower than 180 °C, up to 300 °C.
3, the fuel can be used: firewood (chopped firewood), coal, steam or electric heating.

 

 

Applicable scope for airflow animal feed dryer::

Airflow animal feed dryer is suitable for drying powdered and granular materials, such as starch,

tapioca flour, gluten, flour additives, fish meal, distillers grains, corn gluten, grass, grass meal, 

titanium dioxide, activated carbon, sodium fluoride, fluorite mine, silica powder, synthetic resin,

calcium phosphate, biomycin, sodium silicate, dextrose, sodium sulfate, sulfide ore, phosphate rock,

fused phosphate, ferric oxide, calcium carbonate, ilmenite, iron oxide , potato granules, tea meal, 

medicine, pharmacy, coal, wood saw powder. 

 

 

 

Technical Parameter of airflow animal; feed dryer machine:

 

Model	GD450	GD650	GD950	GD1300
Diameter (mm)	450	650	950	1300
Diameter of charge-in (mm)	≤3	≤3	≤3	≤3
Moisture content of charge-in	10-80%	10-80%	10-80%	10-80%
Moisture content of discharge ( ≥)	5%	5%	5%	5%
Capacity(kg/h)	100-500	600-1500	800-2500	1500-5000
Weight(kg)	1550	5500	7500	11000
Installed size (m)	6*1.5*4	8*1.5*4	15*2.5*5	20*4*5

 

450 type airflow animal feed dryer machine:

 

650 type airflow animal feed dryer machine:

 

950 type airflow animal feed dryer machine:

 

Working principles of airflow animal feed dryer machine:

 

The airflow animal feed cdryer machine is to send the wet particulate material into the hot air flow, and with the parallel flow, the wet raw materials compounds with high temperature air. Eventually 

moisture is separated by airflow dryer machine from the raw material through the separator,and 

we can get dried particulate products. This airflowflow dryer  machine works well on developing

feed resources, and reducing feeding costs and environmental pollution .

 

Structure of airflow animal feed dryer machine:

Firewood ( chopped firewood ), coal, steam or electric heating all can be the fuels for airflow animal feed dryer machine. Brcause of the low energy consumption and high efficiency, the fuel will be cost less. So the airflowflow dryer machine is an ideal equipment for drying pellet feeds and powder feeds.

 

Parts of airflow animal feed dryer machine: 

 

 

Working Theory of animal feed dryer:
Raw materials go into the stove and then are sucked into the cyclone together with hot air through pipes. After-drying material will be discharged from the cyclone, but waste hot air and water vapor will go out from the top of the cyclone directly.
Notes:
1. Do not feed raw materials until the hot air temperature at the air outlet gets to 150℃.
2. It will be better to screen large particles before feeding materials, which will improve the drying efficiency. 

 

Factory of processing site:

 

 

Package and delivery for the finished equipment:

 

 

 

Pre-Sales Service:

 

1)  Offering comprehensive technical and business consultation services for airflow animal feed dryer machine;

 

2)  Proposing the most suitable scheme for airflow animal feed dryer machine for our clients;

 

3)  Designing and fabricating targeted products according to the special requirements of clients; 

 

4)  Training periodically high qualified service technician.

 

After-sales Service: 

 

1)  Highly inspecting equipments in every working procedure, quality comes first;

 

2)   Fast & Safe Delivery for the airflow animal feed dryer machine with standard exporting packages; 

 

3)  Assisting our clients for foundation construction of equipments;  

 

4)  Dispatching engineers to install and debug equipments; 

 

5)  Training the first-line operators on site; 

 

6)  Regularly visit clients to solve production problems 

 

7)  Providing life-long maintenance service;

 

8)  Providing technical exchanging;  

 

 

 

If you have any need or question, please feel freely to contact Dido Fu:

 

Skype:DidoFu1107             E-mail:xltxc @gdbloc.com

 

Tel:+86-371-56668520        Fax:+86-371-55989982

Mob:+86-13073797095

 

or visit our company website:guangdamochine.en.china.cn