Specifications

VIC-K pellet machine
1. 100-3000kg/h
2. Make pellets from all kinds of wood material and grains

Brief introduction:

 

1.SKJ pellet mill is mainly proper for making pellets from crude fiber material , such as corn stalks, sawdust, paddy husk, cotton stalk, cotton seed hull and others agricultural stalks and factory waste whichi is difficult to binding, forming .

 2.This pellet machine is  also used for making pellets with low temperature, for example, biological fertilizer, organic fertilizer, combined fertilizer and so on.

 

Description:

 

1.Use the cold press forming technique, polishing craft, good appearance, and compact structure;

 

2.High capacity, low consumption, low noise, little trouble, high efficiency, continuous work, economic and durable;

 

 3.Whole machine is made by special high quality material, and KAF three-level gear reducer and electrical control box ,main parts are used the high quality alloy steel with durable material, use the Germany vacuum stove hot principle, lifetime is bigger 5-7 times than common pellet mill.

 

 

 Raw material scope:

 

Sawdust, rice husk, cotton stalk, cottonseed skins, weeds, crop stalks and other plant wastes, biomass, sawdust pellet with all kinds of sawdust, rice husk, paddy straw, sunflower stalk, hulls, forestry wastes, wood chips, chemical waste and many other wastes or solid powder materials. especially low-bonding and unformed materials.

 

Raw material moisture: 12%-25%

 

Raw material size: not extend 5mm

 

 

Working Principle :

The raw material is under dried condition, which is compressed and formed into small eraser-sized bits, the final pellets is clean, pleasant and smooth, and its density is more than 1.0g/m3.

 

 

Advantage :

 

1. With KAF reduction gearbox, can make best quality wood pellets from all kinds of wood material ;

2. This pellet machine also can make feed/livestock pellets for fish, chicken, cow, rabbit and so on;

3.  This system pellet mill can work 24 hours continuousy;

4. Finished pellets length can be adjustale from 4cm to 12cm, diameter can be  Φ3, Φ4, Φ5, Φ6, Φ8, Φ10, Φ12mm

 

Main data:

 

 

Model	Motor (KW)	Capacity (kg/h)	Weight(kg)	Machine size (mm)
VIC-200K	7.5	80-100	250	1150*530*750
VIC-250K	15	100-150	300	1250*600*850
VIC-300K	22	150-200	350	1300*600*900
VIC-350K	30	350-500	600	1300*850*1300
VIC-400K	30	400-600	700	1400*800*1400
VIC-450K	45	700-1000	800	1600*1400*800
VIC-500K	55	800-1000	2300	1800*1000*1550
VIC-550K	55	1000-1500	1000	1700*850*1600
VIC-800K	110	1500-2000	4500	2000*1050*2050

 

 

 Machine Photos:

 

 

 

 

 

Spare parts:

 

 

 

End Pellets :