Specifications

Low temperature drying
Low energy consumption
Burning-proof design
High drying speed
Without dust emission

SawDust Dryer 

Sawdust dryer also known as sawdust drying machine, it is applied for the solid raw material which has flow ability.  We have the special design for drying wet moisture fiber raw material saw dust .Application Initial moisture below 50% .The whole saw dust drying machine is consists of Hot wind Stove ,Material feeder ,Drying Pipe .Drying Cyclone .Cyclone separator ,Fan ,Control system ,This sawdust drying machine could dry the damp sawdust into optimal moisture 8-14% for making biomass briquette and charcoal briquette .

 

Working principle

The damp/wet fiber  raw material like sawdust from sawdust crusher or after crushing wood particle  through the material feeder conveyer to the drying pipe .and flue gas or heated fresh air enter into the drier at the same time.They are mixed fully.The damp sawdust are passing the drying pipe .Then the wet moisture will be separated from the material . The dried finished products discharged from cyclone separator, the whole system could be operated at Negtive pressure air pressure of the fan .our special design could have excellent drying result; we have more than 20 years working experience.

 

Low  Drying Temperature

 

The inlet hot air temperature could be 100- 180 °C.

 

The outlet hot air temperature could be 80-100°C

 

Mostly the temperature will be depends on the damp/wet initial moisture and special character .

 

Application:

1,Drying the damp /wet saw dust into optimal moisture (8-14%)for making wood briquette .

 

2,Drying the damp/wet saw dust into optimal moisture (8-14%)for making biomass wood pellets

 

3,Drying the wet wood flour into best moisture(below 3%) for making WPC products

 

Feature:
1. Energy saving2. Wide use for wood briquette production/For wood pellet production/For WPC production 
3. Good drying effect4. Low noise 5,Less burning fuel

 

 

 XW-H-350 Type Sawdust Dryer Main Technical Parameter

(Screw Conveyor + Screen Machine)

Name	Sawdust dryer
Model	Xw-h-350
Moisture before drying	30%-50%
Moisture after drying	8-14%
Drying Speed	400-500Kg/H
Fan Power	11KW
Flow volume	8960 m³/h
Drying Pipe Diameter	350mm
Drying Pipe Material	steel plate
Thickness Of the Drying Pipe	2.5mm
Direct Burning Hot Wind Stove Size	1650*900*1200mm
Fuel (firewood) Consumption	40-50kg/h
Max Height Of the Drying Pipe	3.8-4 Meters
Saw Dust Drying Travel Distance In Drying Pipe	35Meters
Machine Weight	3000kg
Screw Conveyor Machine  Power	0.75KW
Saw Dust Screener Machine Power	0.75Kw
Power Supply	3 Phase 380V 50Hz Single Phase 220V
One Control Cabinet	Control Screw conveyor /screener/Dryer Fan
Package	Elastic Film Package
Delivery Time	15-20 days

 

 

 

  Sawdust Dryer Delivery