China gold supplier with professional performance ball forming        briquette machine          

Production Description of ball forming briquette machine  

The ball pressure machine is also known as roller briquette machine. Along with the diversification demands of customer, the traditional two rollers briquette machine can be upgraded into four rollers, that used twice molding strategy. This way not only improves the roller pressure, but also increases briquette hardness. Moreover, except for mechanical type, we also offer the hydraulic type pressure machine. It is the best choice for some of the material not easy shaped materials, such as dry powder, iron powder, fertilizer. It means that we add a hydraulic cylinder on the roller briquette machine.

Widely application of ball forming briquette machine  

Ball pressure machine is mainly used for compaction of powder material which is difficult to form. Its characteristic is molding pressure. The main engine revolution can be adjustable, equipped with a spiral feeding device. It is mainly used for pulverized coal forming; powder molding; coke powder molding; iron and various metal slag powder molding etc. In addition, this machine has an extraordinary effect for easy comparison of materials, such as coke powder, iron oxide, remove dust, coal, powder metallurgy, sponge iron carbon products.

The ball press machine is broadly applied in the industry of refractories, power plant, metallurgy, chemical industry, energy, transport, heating, etc,.The material through press into different molds, this way reduce dust, saving energy and environmental protection, easy to transport and improve the utilization of waste. It has favorable economic benefit and social effect.

Working principle of ball forming briquette machine  

Ball pressure machine is compost of three parts: feeding part, transmission part, and forming part. The constant feed pressure of the machine makes pellet quality stability.

• 1. Feeding part is mainly used for quantitative feeding top ensure the uniform material into rollers.
• 2.Transmission part. The principal drive system can be regarded as an electric motor-triangle strip -   reducer - exposed gear - rollers.
• 3.Forming part mainly refers to host part, its core part is rollers. Two rollers can be regarded as a core part of molding part which can be powered by the reducer to rotate synchronously and oppositely. When raw materials fall into the two rollers, the high pressure can press and mold it into required shapes.

Different shapes of ball forming briquette machine  

In addition, the shape of the product is also growing diversity, such as pillow shape, oval shape, egg shape, column shape, square shape, heart shape, bread shape can be customized. 

 Different molds of ball forming briquette machine  
 

Technical parameters of ball forming briquette machine  

The requirements of raw material 

v The size of inlet raw material should less than 3mm,

v The moisture should control between 12%-15%.

v In order to protect the mold, the raw material can’t be mixed with metal material.

v When the contact reached, we will freely provide proportional formula.

  For example, after the ratio, the liquid binder and charcoal powder will form a special formula.

The characteristic of ball forming briquette machine  

♦ High quality and long usage life

♦ Multi-purpose and Various options

♦ Energy saving and high capacity

♦ Provide convenience and benefit

♦ Easy to adjust, low maintenance cost, economic and durable.

♦ Customers can customize the molds according to their requirements

Special support

• 1.By over 30 years of research and development, we obtained six kinds of special binder formula with 100% natural, smokeless and smelless. It is free for offer clients.
• 2.The combustion improvement formula also can be added on the surface of charcoal briquette, it beneficial to ignite instantly and lengthen the burning time to 3 hours(normally1-1.5hour).
• 3. The special water-proof technique also be offered to prevent wet charcoal briquette, even though completely immersed in water.
• 4. Engineer available to service machinery overseas.

Packing and shipping

1. Free fumigation plywood case for a single machine.

2. Waterproof packing with the international export standard by 20ft, 40ft, 40hp container.

3. Equipment Fittings, Electric Motor and Power Cabinet will be packed in Wooden Case or Iron Box. Other Equipment will be packed by Color-Stripes Plastic Cloth.

4. Or according to customer's requirements.

Delivery detail: Within 7 working days after receive your deposit. 

Company profile

Lantian Mechanical Plant was built-in 1980s. It has over 30 years experience in coal and charcoal production field. Our factory is located in Mechanical city - Gongyi, Henan province. Along with development and change of market demand, Lantian Mechanical plant also insists on the development of product diversity. The biomass briquette machine, a charcoal briquette machine, a coal briquette machine, shisha charcoal machine are become our popular product in the global market.

In the field of import and export trade, Lantian Mechanical plant has over 10 years of experience. It also obtained the CE and ISO certification. For ten years, our machine is exported to every corner of the world, such as Malaysia, India, South Africa,Indonesia, Sadi Arabia, Canada, Pakistan, Kuwait, Turkey, Egypt and others.

Service Commitment

Pre-sales service

Providing the project designs and processes flow design.

Prepare the machine equipment purchase plan according to your actual demands.

According to your specific needs to design and manufacture products.

Training technical person for you.

On-sales service

Completing the acceptance of the equipment and assist in the development of construction programs and detailed procedures

After-sales service

Technicians guide the installation of equipment, commissioning and training of operators on the scene.

EXW, FOB and CIF terms.

EXW: You arrange the shipping details from our factory to your port by yourself.

FOB: We arrange freight transport to Qingdao, Shanghai or other ports of China, then you arrange shipping details from China port to your country port.

CIF: We arrange all shipping details to your country port, and ensure machines smooth arrival.

Tips:

We are Liantian Mechanical Plant with over 30 years experience, and we can provide the entire production line for you.

Our factory was situated on Heluo Road, Gongyi City, Henan Province.

The nearest Airport is Xinzheng International Airport, and the airport code is CGO. We can take you. 

                  Welcome to Gongyi Lantian mechanical plant, we are                    sincerely looking forward to cooperation with you!