Name: Low consumption and high productivity ring die pellet machine
Brand: Lantian
Availability: InStock

Product Details

Product Description

Low consumption and high productivity ring die pellet machine

Product application of wood pellet machine

Pellet machine is apply for forming the required moist powder into particles. It also can be pulverized into particles of the desired dry bulk material. The pellet machine is mainly charactered by is the screen easy assembly and disassembly, tension is also adjustable, effortless to clean.

Flat die pellet machine and ring die pellet machine

As is well known for all, the particle machine is divided into two series - flat mode series and ring mode series.

In the suppression of particles, the ring mode pellet machine was mainly through the particle machine mold and pressure wheel pressure to make the particles. Mold of ring mode pellet machine is upright and the mold is surrounded by the inner wall of the machine. When the machine is launched, the mold is rotated, and the press wheel is still not moving. Owing to the mold to the vertical, leading to less pressure, this machine more suitable for the suppression of feed particles.

Flat die pellet machine

Mold of flat mode pellet machine is horizontal, but also through the mold rotation to suppress particles. Due to the characteristics of the mold, the pressure is relatively large, this series machine can be used to suppress the sawdust and straw particles. Moreover, the flat mode pallet machine with good universal, the feed, wood chips, fertilizer particles also can be suppressed.

Product application

Wide Range of wood pellet machine

This machine uses the swing function of the rotary drum, through the wire sieve can make the wet powder material particles. The straw particle machine can replace firewood, raw coal, liquefied petroleum gas, etc. It widely used in life range, heating furnace, hot water boiler, industrial boiler, biomass power plant, etc.

In addition, the biomass straw particle machine is based on crop straw as raw material, after pressing to become cylindrical particles. Not only to be used as a biomass fuel, but also can be used as a feed for livestock and poultry consumption. This machine is very convenient use, energy saving, environmental protection. The energy saving is the most important thing, truly two utilization of waste.

In the field of chemical drugs, to grind wet power into particles, post drying for compressed tablets. In the food industry, it used for the treatment of sweets and sugar mixture and malt milk and other products. Besides that, the wood pellets machine also can used for other industries such as ceramics, plastics and other materials into a mixture of particles.

Main Features

Main product Features of wood pellet machine

1.wide range of processing, hardwood, pine, bamboo shavings, peanut shells, rice husk, straw etc.
2.biomass material we could find, the particles can be made without any additives.
3.spindle, the platen roller shaft, spindle bearings, roller bearings used in all increase the pressure, can withstand the load reaches the original more than doubled.
4.large diameter roller, large output, high rate of granulation, particle uniformity, high particle strength.
5.All bearings are sealed structure, effectively prevent dust from entering the bearing improves the working environment and extend bearing life.
6.shell with steel, greatly enhances the strength and toughness, and never the case breakage occurs.

Product advantages of wood pellet machine

1.gear box is made of high quality gray cast iron materials, low noise, good shock absorption.
2.gear transmission, belt drive than the worm gear and more efficient, and to avoid the belt drive belt slip, belt life is short and other shortcomings.
3. has changed the design of conventional pellet mill housing increases the ribs, and increase the thickness of the casting, thereby greatly enhancing the strength of the machine, to prevent breakage of the shell particles machine.
4.die plate and pressure rollers made of high quality 42CrMo alloy steel, hardness 55-60HRC.
5.It is best suited for processing wood mold pore structure, through a lot of experiments to obtain core technology --- the best compression ratio of the orifice

6.safety of electronic control systems, all electrical components is electrical. In full compliance with the CE standard operating system, the emergency stop button to quickly shut down the machine in case of emergency.
7. To control the mesh sieves mesh number according to the particle size requirements.
8.Because there are strict, standardized production technology and management, so make sure all of our machines and each part consistency and interchangeability of spare parts for customers to choose more confidence.
9. The wood pellet machine is strong and firm, easy to operation and smooth running. The rotary drum is made of stainless steel to ensure the quality of the treated material is clean and does not change.

Company profile

Lantian Mechanical Plant was built-in 1980s. It has over 30 years experience in coal and charcoal production field. Our factory is situated in the mechanical city - Gongyi, Henan province. Along with development and change of market demand, Lantian mechanical plant also insists on the development of product diversity. The biomass briquette machine, a charcoal briquette machine, a coal briquette machine, shisha charcoal machine are become our popular product in the global market.

In addition, our factory also produces other auxiliary machines such as crusher, dryer, conveyor machine. Nowadays, our factory acquired eight utility model patents, two external appearance patents, and one invention patent.
In the field of import and export trade, Lantian Mechanical plant result from 10 years of experience. It also obtained the CE and ISO certification. For ten years, our machine is exported to every corner of the world, such as Malaysia, India, South Africa,Indonesia, Sadi Arabia, Canada, Pakistan, Kuwait, Turkey, Egypt and others.

Service commitment

Service Commitment

Pre-sales service
According to customers’ specific needs to design and manufacture products, we can draw up the machine equipment purchase plan according to your actual demands.
Not only providing the project design and process flow design, but also training technical person for you.
On-sales service
Completing the acceptance of the equipment and assist in the development of construction programs and detailed procedures
After-sales service
Technicians guide the installation of equipment, commissioning and training of operators on the scene.

Certifications

Packing & Delivery

Packing and shipping

Waterproof packing with the international export standard.
Equipment Fittings, Electric Motor and Power Cabinet will be packed in Wooden Case or Iron Box.
Other Equipment will be packed by Color-Stripes Plastic Cloth.
In accordance with customer's requirements.