Product Details

Brief Introduction Of Three Cylinder Sand rotary dryer

Sand rotary dryer is mainly applied for stoving slag, sand, coal, fly ash, iron powder, ore, quartz sand and other particle materials. It has the following characteristics:

1. The cylinder protect itself, thermal efficiency can up to 95%.The whole length of the dryer reduced to 50% approximately than mono-cylinder and reduced land investment to 50% approximately

2. Cylinder adopts heat-resistant and wear-resistant steel plate welding with long service life and easy maintenance..High thermal efficiency , temperature of outer cylinder is 60or below(temperature of outer mono-cylinder is high to 150°C)

3. Low temperature of outlet, long-service of dust removal machine. It also can be directly connected to air box pulse bag filter.

4. Without gear and pinion drive, but wheel rotation applied, level operation of the complete machine makes system simple and reasonable.

5. Air heater could match boiling furnace, or oil furnace can also be applied, which can dry materials with size below 20mm.

6. Final moisture index can be adjusted according to requirements of customers.

Applications Of The Three Cylinder Sand dryer

Industrial Dryer have many applications but are most commonly seen in the mineral industry for drying sands, limestone, stones and soil, ores, fertilizers, wood chips, coal, iron sulphate, filter cakes, sewage sludge, etc

Drum or Shell Variations Of Three Cylinder Sand dryer

A Industrial Dryer can consist of a single shell or many, though any more than three drums is not usually necessary. Multiple drums can reduce the amount of space that the equipment consumes. Multi-shell dryers consist of several concentric tubes. Multiple shells allow the dryer to be utilized in a more compact space. The drums are often heated directly by oil or gas burners. The addition of a combustion chamber on the entry end helps ensure efficient fuel usage, and that homogenous drying air temperatures. As the material moves through the rotating drum is heated and moisture released. Some dryers also offer the option to cool, clean, shred, and/or separate the dried material.

Combined Processes Of Three Cylinder Sand dryer

Along with drying Industrial Dryer have the ability to increase their economy by combining other process needs with drying. Other processes that can be combined with drying are

Cooling
Cleaning
Shredding
Separating

Technical parameters Of Three Cylinder Sand dryer

Model	Shell diameter(mm)	Shell length (mm)	Capacity(t/h)				Power (kw)
Model	Shell diameter(mm)	Shell length (mm)	Ore slag	Flyash	Clay	Yellow sand	Power (kw)
HK2.0×4	2000	4000	5~10	4	4~6	10~15	11
HK2.0×5	2000	5000	10~15	6	6~8	15~20	11
HK2.5×5	2500	5000	20~25	8	8~12	20~25	15
HK2.5×6	2500	6000	25~30	10	12~15	25~30	15
Hk2.8×6	2800	6000	30~35	15	15~20	35~40	22
HK3.0×6	3000	6000	35~40	20	20~25	40~45	30
HK3.0×7	3000	7000	40~45	25	25~30	45~50	30
HK3.2×7	3200	7000	45~50	30	30~35	50~60	44
HK3.2×8	3200	8000	50~60	35~40	35~40	60~70	44
HK3.6×8	3600	8000	60~70	40~45	40~45	70~80	60
HK3.8×9	3800	9000	70~80	45~50	45~50	80~90	60
HK4.0×10	4000	10000	80~90	50~60	50~60	90~100	74

Note : this parameter just for reference , we also have other models machines , if you are interested in our equipments , please don't hesitate to contact me .