FORNEY   flame detection probe   IDD-II

Nanjing Win Union Automation and Control Technology Co., Ltd.

Sales : Tonny 

skype:yluedq qq:994274685

TEL: ( 86-25)-52791167   52791168

FAX: ( 86-25)-52791169

E-mail:  njxj888@163.com    

Add: Jiangning Shuanglong Avenue No.1222  Nanjing, Jiangsu. China 211100

Reliable flame detectors (oil, coal and lignite flames)

FORNEY IDD-II Intelligent Dynamic Flame Detector enables accurate detection and identification of oil flames, coal flames and lignite flames.

The IID-IIU flame detector is used to detect oil flames and coal flames. The IID-IIL flame detector is used to detect lignite flames.

The IDD-II Intelligent Dynamic Flame Detector is used in conjunction with the FORNEY Fire Detection Amplifier DR-6161E, DR-6101, RM-IDD, IDD-IIIA. When the IDD-II flame detector detects the flame, its hardware circuit amplifies the ripple voltage signal generated by the sensing element, and the amplified signal is transmitted to the amplifier via a four-core shielded cable. The amplifier processes the signal and outputs the signal to the burner management system.

The electronic devices of the flame detector are enclosed in a cast aluminum housing. The amplifier periodically performs a self-test to determine if the flame detector is working properly.

Features:

1. Lead sulfide photoelectric sensor:

Infrared and visible light for oil, coal and lignite flames.

2. Dynamic flame detection circuit:

Only produce a dynamic flame signal, without detecting heat radiation.

3. Simple and durable structure:

The circuit board and the sensing element are enclosed in a cast aluminum housing as a replaceable part.

4. Easy installation and maintenance:

Fast electrical and mechanical contact, easy installation and maintenance.

5. FM certification

IDD-II intelligent dynamic flame detector

Product and installation accessories

IID-II has filters (coal and # 6 oil)

IID-IIU no filter (# 2 oil and gas)

IID-IIU no filter (# 2 oil and gas)

Forney Flame Detector, Forney Flame Detector, Forney Flame Detector, Forney Flame Detector, Forney Flame Detector, Forney Flame Relay, Forney UV Flame Sensor, Forney Processor, Forney Infrared Probe, etc.

The Forney PM-DR-6101E amplifier is a stand-alone intelligent controller consisting of two printed circuit boards (PCBs) with a cover base. One of the PCBs includes a combination of power supplies, relays, and output / input (I / O) interface software. Another PCB includes microprocessors, stabilizers and signal processing electronics. The entire unit can be installed in a separate cabinet. IDD-II infrared filter with filter, IDD-IIU without filter infrared probe, UV-4 probe, DR-6 IDD / UV probe.

D Furnace Flame Detector Uniflame 95 Series

Overview: FORNEY UNIFLAME series flame detectors are based on microprocessor-based flame detectors using solid-state infrared sensors (IR), UV sensors (UV) and dual sensors (IR UV). The detectors are equipped with an internal flame relay and can adjust the ON / OFF threshold, so no remote flame amplifiers are required. The UNIFLAME  95 series detector combines the principles and characteristics of the FORNEY DPD Flame Detector to detect the presence or absence of a target flame in a single burner or multiple burner conditions. The UNIFLAME  95 series detector detects the modulation amplitude of the target flame (ie, the flicker characteristic of the flame). In the setting procedure of the detector, the modulation frequency characteristic which produces the optimum flame ON / OFF