900 Wall Panel Roll Forming Machine

910 Wall Panel Roll Forming Machine

1050 Wall Panel Roll Forming Machine

1080 Wall Panel Roll Forming Machine

Wall panel roll forming machine can produce different kinds of products, for example: The light steel keel, the switch cabinet column, the elevator guide rail, the electric cable bridge, the generatrix bridge, the security doorframe, the shutter, the warehousing shelf, the supermarket shelf, the automobile summer beam, side skin of big bus, steel structure, CZ section steel, wave spin board, the guard board of highway and so on. 

The production line covers the equimpents as below: 

Charging car, uncoiler, leveler, forming group, flying saw, , collection table, combination die, operation cabinet.

APPLICATION:
Metal wall panel is widely used for commercial metal buildings, associated with agriculture plant and warehouse. Wall panel roll forming machine is the essential for its production.

FEATURES:
1.Manual Decoiler or Hydraulic Decoiler with Break is equipped optional for roll forming production.
2.Manual Roller Shearer before Roll Forming is the essential for roll forming production, and length control is set on touchable screen, so that material is calculated by PLC for each material thickness and color production.
3.Refine steel plates in 22 mm as Sidewall of machine is used.
4.14 – 20 Nos of Rollers is used for roll forming, ensuring profile strength.
5.Mitsubishi (Japan) PLC and 5.7' Touchable Screen are used for for data processing and setting.
6.Roll forming speed is 0 – 20 meters / minute.

TECHNICAL PARAMETER
WALL PANEL ROLL FORMING MACHINE
(1)Suitable Material: PPGI Coil
(2)Material Width: 1000 / 1250 mm
(3)Material Thickness: 0.40 -- 0.80 mm

Production Process:  
decoiling – manual shearing – roll forming – cut-off after sizing – final wall panel

Composition:
1.5 – 8 tons hydraulic decoiler: 1250 mm width; Ø 500 – 600 mm inner diameter; 2.0 kw
2.Manual shearing device before material feeding: PLC calculating and controlling, material saved, no wasted; roller cutter
3.Roll forming machine: 14 – 20 Nos roller station; Ø 80 mm main shaft; 22 mm machine sidewall thickness; 0 – 20 meters / minute
4.Hydraulic cutting-off: Gr12 steel blade; 20 tons working table pressure; with fan-cooler; 4 kw
5.Simple run-out table: 4 pieces, in 8# channel steel
6.PLC controller: Mitsubishi PLC; 5.7" Mitsubishi touchable screen; Japanese frequency converter; Schneider electronic components