Product Details

high efficient tumble dryer wall with belt conveyor and control cabinet for free

Please contact Mobilephone :+86-15036078775

Product Description

used rotary furnace

1. Discription of Stainless steel rotary dryer :

Rotary dryer, also is known as rotary drum dryer. drum dryer is widely used in drying granule material in fixed moisture range, such as yellow ground in dry mortar industry, all kinds of molding in casting industry and blast furnace slag in building material/cement industry, Small size clay and small granule material in chemical industry which can not happen chemical effect, high temperature resistance and have no strict control to smoke. According to different moisture requirement for dried material in various industries, water content in finished product can be able to below 1-0.5%.

2. Applications of Stainless steel rotary dryer :

It is widely used in building materials, metallurgy, chemicals, industrial drying slag cement limestone, coal, slag, clay and other materials

3. Structure of sawdust rotary dryer :

It includes the rotary, jan plate, transmission, seals, and other support equipment and components.

4. Advantages of Stainless steel rotary dryer :

1. Triple-drum rotary dryer uses telescope-feed structure, dry material quickly.

2. Simple design, self-insulation, improve the heat efficiency to exceed 80%

3. Delicate structure, steady operation

4. Good drying performance, coal consumption less than 8kg 1ton material.

5. The fuel can be coal oil, natural gas, etc, granule and powder material less than 20mm can be dried.

6. Reduce land area for 50% compared to single drum dryer, so construction investment is saved 50%, power consumption saved 60%.

7. Finished product moisture can be adjusted depending on clients’ requirement.

8. Lower outlet temperature, longer using life of dust removal.

9. Drive by tug, not gear and pinion.

10. Finished product temperature lower than 60°C, packing can be done continuously.

5. Main Structure of High Quality sawdust rotary dryer :

It mainly consists of revolving part, raising stuff plate, driving device, supporting device and seal ring.

Main features:

1. sawdust rotary dryer has Strong anti overload ability, large handling capacity, less fuel consumption, low dry cost.

2. Adopt downstream drying method, the hot air with wet materials enter into the dryer by the same side, can use the high temperature air to achieve very high evaporation strength, the exist temperature of dryer is low, the thermal efficiency is high.

3. According to different materials' properties change operation parameters, make the material in the coal rotary dryer cylinder body can form a stable all broken fabric curtain, qualitative heat is more fully.

4.New feeding and discharging device eliminate the feeding jams, discontinuous, uneven and returning charge etc. Phenomenon, reduce the load of dust removal system.

5. New internal structure, strengthened the already scattered materials' cleaning and heat transfer effect, eliminated the sticky phenomenon in cylinder

body's inner wall, make material moisture, sticky adaptability more stronger.

6. Dryer has realized "zero horizontal thrust", greatly reduce the wear of block roller, cylinder's operation is smooth and reliable;

7.Drying machine adopts "center-adjusting roller device", make the cooperation of roller and rolling ring always show linear contact which greatly reduces the wear and power consumption.
8. According to customer's request control product size and moisture, when dry slime, the moisture can reach below 8%, particle size can be controlled below 8mm.

6. Technical Specifications of sawdust rotary dryer : Please contact :Tel:0086 15036078775

type(mm)	indiclination(%)	rotation speed(r/min)	input tempreture(ºC)	motor power(kw)	outpur(t/h)	weight(t)	reforance
600×6000	3-5	3-8	≤700	3	0.5-1.5	2.9
800×8000	3-5	3-8	≤700	4	0.8-2.0	3.5
800×10000	3-5	3-8	≤700	4	0.8-2.5	4.5
1000×10000	3-5	3-8	≤700	5.5	1.0-3.5	5.6
1200×10000	3-5	3-8	≤700	7.5	1.8-5	14.5
1200×12000	3-5	3-8	≤700	11	2-6	14.8
1500×12000	3-5	2-6	≤800	15	3.5-9	17.8
1800×12000	3-5	2-6	≤800	18	5-12	25
2200×12000	3-5	1.5-6	≤800	18.5	6-15	33
2200×18000	3-5	1.5-6	≤800	22	10-18	53.8
2200×20000	3-5	1.5-6	≤800	30	12-20	56
2400×20000	3-5	1.5-5	≤800	37	18-30	60
2800×15000	3-5	1.5-5	≤800	40	20-35	72.5
2800×18000	3-5	1.5-5	≤800	40	25-35	75
3000×20000	3-5	1.5-5	≤800	55	28-40	78
3000×25000	3-5	1.5-5	≤800	75	32-45	104.9