Hot Selling rotary dryer For Slag,Sand Etc.
USD $1,000 - $8,300 /Set
Min.Order:1 Set
Gongyi Lantian Machanical Plant
Hot Selling Rotary Dryer for Slag,Sand Etc.
Introduction
Rotary drier is widely used for drying materials in the industries of cemet, mine, contruction, chemical, food, compoud fertilizer, etc. Feeding and discharging unit is installed with thermocouple to control drier temperature. The temperature change of drier's feeding end can be indicated by the thermometer to control the inner drier temperature ( generally 250-350°C)
Applicable Scope
1.Chemical, mine, metallurgy industry, like ore, coal, metal power, clay, kaolinite.
2.Agriculture, forage, fertilizer Industry,such as straw, grasses, and sawdust and tree leaves, fish meal, corn,rice, wheat, corn sauce, starch slag, vinasse, liquid, fruit dreg, soy sauce slag, peatmoss, organic compound fertilizer, sludge, aquatic products,slaughterhouses waste, organic fertilizer, inorganic phosphate fertilizer and ammonium sulfur.
Working Principle
1.This drying machine consists of rotary body, material plate, conveying device, supportive device, sealing ring and other components.
2.Since the machine has a gradient, the materials enter the cylinder from its higher side. There is full of hot gas in the cylinder, materials will be rolled by the metal plate inside up and down to accelerate the drying rate, then they will pushed to the lower side by the rolling device. The dried materials will be collected at the bottom.
Main Technical Parameters
type(mm) | Gradient(%) | Rotational speed minute(r/min) | Inlet air temperature | Power(kw) | Product capacity(t/h) | weight(t) |
Ø600×6000 | 3-5 | 3-8 | ≤700 | 3 | 0.5-1.5 | 2.9 |
Ø 800×8000 | 3-5 | 3-8 | ≤700 | 4 | 0.8-2.0 | 3..5 |
Ø 800×10000 | 3-5 | 3-8 | ≤700 | 4 | 0.8-2.5 | 4.5 |
Ø1000×10000 | 3-5 | 3-8 | ≤700 | 5.5 | 1.0-3.5 | 5.6 |
Ø1200×12000 | 3-5 | 3-8 | ≤700 | 11 | 2-6 | 14.8 |
Ø1500×12000 | 3-5 | 2-6 | ≤800 | 18.5 | 3.5-9 | 17.8 |
Ø1800×18000 | 3-5 | 2-6 | ≤800 | 22 | 5-12 | 31 |
Ø2000×18000 | 3-5 | 1.5-6 | ≤800 | 30 | 6-15 | 43 |
Ø2200×18000 | 3-5 | 1.5-6 | ≤800 | 37 | 10-18 | 52 |
Ø2400×20000 | 3-5 | 1.5-5 | ≤800 | 45 | 18-30 | 60 |
Ø2800×20000 | 3-5 | 1.5-5 | ≤800 | 55 | 25-35 | 72 |
Ø3000×20000 | 3-5 | 1.5-5 | ≤800 | 55 | 32-40 | 91 |
Ø3000×25000 | 3-5 | 1.5-5 | ≤800 | 75 | 40-55 | 104.9 |