Name: 20 years manufacture china centrifugal blower fan
Brand: SHUANGYI
Availability: InStock

Product Details

20 years manufacture centrifugal blower

Brief Introduction
Air blower outer cover and impeller adopt corrosion-resistant performance strong FRP material, air blower all part by antiseptic to punish, can send corrosivity gas , such as acid , alkali ,etc. . Air blower is with high efficiency, the wind pressure is great, the noise is low, can send with the gas of the long distance pipeline . Can as requested manufacture the steel air blower .
Technical parameter

machine Number	Flow(m³/h)	Press completely(Pa)	Power(kW)
2.8A	2450¡«1330	588¡«951	1.5
3.2A	3640¡«991	196¡«1245	1.1¡«2.2
3.6A	5408¡«1470	274¡«1618	1.1¡«3
4A	7420¡«2010	333¡«2000	1.1¡«5.5
4.5A	10580¡«2860	420¡«2530	1.1¡«7.5
5A	14720¡«3977	549¡«3177	2.2¡«15
6A	12720¡«4250	343¡«1137	1.5¡«4
6C	19600¡«3780	226¡«2726	1.1¡«18.5
6D	12720¡«4250	343¡«1137	1.5¡«4
8C	34800¡«7040	284¡«3119	2.2¡«30
8D	27990¡«8150	392¡«2020	3¡«18.5
10C	50150¡«13910	294¡«2344	3¡«37
10D	58200¡«20800	637¡«3158	7.5¡«55
12C	77500¡«19280	275¡«2717	3¡«75
12D	96500¡«35000	922¡«1579	18.5¡«37

Name:S4-72 Centrifugal Ventilator

Item:S4-72

Details of blowers:

1. Applications

This type of fans are generally used for the air conveying and draughting of different types of biomass boilers.

2. Structure

Main parts:Case,Impeller,Motor, protective screening.

fans can be divided into10 specifications according to the impeller angle, each type of blades can be mounted by 15°, 20°, 25°, 30°, 35°

3. Production Parts:

Te standard configuration of this type of fans are generally consist of the following product parts:

case, impeller, hair inlet, motor, system integral pedestal, main shaft, driving system (bearing house, bearing), coupling

4.Order requirement

We will appreciate it a lot if you can offer us your product performance requirement and operation environment for the Centrifugal Fan of you need,so that we can customize optimal product to meet your every requirement.

* air volume/air flow

* total pressure or static pressure

* voltage and frequency

* medium temperature and desity

* altitude of operation place

5. Maintenance of blowers

Maintenance personnel should pay attention to points as follows:

1. Blowers can run based on complete normal conditions
2. Please check every part of blower is regular or not after repairing.
3. Clearing fan and gas pipeline internal dust at regular period, dirt and impurities such as water, and to prevent rust
4. Repairing cannot going at running period.

6. Notes

1. If the discovery of flow is too large, and not fit for the request or short time need to smaller flow, can use the throttle device adjusted.

2. Inspect the thermometer and oil mark sensitivity at regular period.

3. If there is off-normal occurrence happen when blower drive, stop and rotate,should repair it as soon as possible.

4. if there is small glitch, should check it, and repair it.

5. In addition to every time after repairing should be oil change outside, still should be regularly oil change.

Certification

Welcome to Shuangyi Environment Engineering Co., Ltd

Pls Feel Free to Contact Me:

Rose Wang

E-mail: chinashuangyi( at )

Skype: chinashuangyi