Best price FRP material axial fan made in Chinablower

 Specifications :

1. Simple structure, lower noise, low-pressure .

2. Difference impeller angle can be choose based your needed, 15Deg, 20 Deg , 25 Deg ,

    30 Deg, 35 Deg .

3.100% performance test before shipping.

4.Total 13 difference types based the impeller dimension, including including 280mm dia, 315mm

    dia, 355mm dia, 400mm dia, 450mm dia, 500mm dia, 560mm dia, 630mm dia, 710mm dia,

    800mm dia, 900mm dia, 1000mm dia, 1120mm dia.

5.Impellers were drove directly by the power-generating.

   The motor of ZHT-35 axial-flow fan  is improved, the loss of air flow is reduced. Therefore, the  

   efficiency of the fans is 89.5% higher when the noise is much lower. We strengthen the welding of

    blades and impeller so that the blades can avoid breaking. TheZHT-35 series axial fan is divided

    into 5 kinds of blade installation angle such as 15°,20°,25°,30°, 35°.

 6) The FRP Axial fan can be apply to:

    ZHT-35  type Axial Fan is widely used in factories, warehouses, offices, residential houses to

    ventilate or enhance heat dissipation. It is also series installed in longer pipe line.

     The air transferred shall not be strong corrosive, not with notable dust, the temperature of the air

    should not exceed 60°C.

The parameter and model choose list of the FRP axial fan : 

 1) Shuangyi has produce the FRP axial fan about 30 years.

2) Shuangyi has the professional moulding equipment, which can produce the quality mould FRP

      axial fan parts.

3) Shuangyi can produce 1000 sets of the FRP axial fan per month.

4) Each set FRP axial fan will be test before delivery.