ceramic structured packing, buy Ceramic Tower Packings 450X/Y on China Suppliers Mobile

Product Details

Specifications

Ceramic Tower Packings
Good Heat, Alkali & Acid Resistance
Tyep:250X/Y 350X/Y 400X/Y 450X/Y 450X/Y 550X/Y 700X/Y
welcome

Ceramic Tower Packings

Introduction:

Ceramic Structured Packing consists of many packing units of similar geometric design. Corrugated sheets placed in parallel formcylindrical units called corrugated tower packing. These are a form of highly efficient packing with separating efficiency several times higher than that of loose packing. They have the quality of low-pressure drop, increased operating elasticity, minimum amplifying effect, and maximum liquid treatment compared to loose tower packing.

Chemical composition

SiO₂	Fe₂O₃	CaO	Al₂O₃	MgO	Other
≥72%	≤0.5%	≤1.0%	≥23%	≤1.0%	2%

Physical property

Index	Value
Specific gravity(g/cm³)	2.5
Water absorption(wt%)	≤0.5
Acid resistance(wt%)	≥99.5
Loss in burn(wt%)	≤5.0
Max. operating Temp.(Degree C)	800
Crush strength(Mpa)	≥130
Mohs Hardness(Scale)	≥7

Geometric characteristic

Spec.	Specific Surface (m²/m³)	Bulk Density (kg/m³)	Void Ratio (%)	Pressure drop (mmHg/m)
250Y	250	420	80	2
350Y	350	470	78	2.5
400Y	400	500	75	3
450Y	450	520	72	4
550Y	550	620	74	5.5
700Y	700	650	72	6
250X	250	380	80	2.5
350X	350	450	78	3
400X	400	480	75	4
450X	450	500	72	4.5
470X	470	440	75	5
550X	550	620	74	5.5
700X	700	650	72	6

Advantage
1) High capacity. New tower design may reduce diameter, while renovate old towers may increase capacity significantly.
2) High separation efficiency. Since it has much larger specific surface area compared to random packing.
3) Low pressure drop, which leads to reduce energy consumption largely.
4) Large flexibility, and scale effect is not obvious.
5) Suitable for all tower diameters.
6) Strong resistance to corrosion of acid and alkali, especially to H₂S, naphthenic acid and Cl-

Applications
1) Rectifying organic halide.
2) Rectifying and absorbing some corrosive mixtures, which are definitely regulated in pressure drop and theoretic plate number.
3) Applied in some towers that contain a large quantity of natural media used to absorb nitric acid and concentrated sulfuric acid, as well as for purifying the air in chemical plants.
4) Operating in vacuum conditions at a bottom absolute pressure of 100pa.
5) Used in heat exchanger and demisting, or as a catalyst carrier.