Product Details

Ceramic Structured Packing consists of many packing units of similar geometric design. Corrugated sheets

placed in parallel form cylindrical units called corrugated tower packing. These are a form of highly efficient

packing with separating efficiency several times higher than that of loose packing.

They have the quality of lowpressure drop, increased operating elasticity, minimum amplifying effect, and maximum

liquid treatment compared to loose tower packing.

In Regular , there have X and Y type for customer optiional. X type: with 30° bliquty, Y type:45° bliquty.X tpye

packing have smaller pressure drop, and Y type have better mass transfer effect.

Advantages

1 .Acid resistance:above 99.8%
2 .Alkali resistance:92%
3. Temperature:0~1300
4 .Compression strength:>20kg/cm
5 .Moh's Hardness:>7

6. Corrugated plated

7. High capacity.New tower design may reduce diameter, while renovate old towers may increase ca pacity significantly

8.Good separation,Since it has much larger specific surface area compared to random packing.

9. Low pressure drop, which leads to reduce energy consumption largely

10. Large flexibility, and scale effect is not obvious

11.Suitable for all tower diameters.

Technical Parameter

specifcation
Product: Ceramic Structured Packing
Type	Void Rate (%)	Thickness	Crest Wave	Pitch Wave	Incline Angle	Packing Factor	Theoretical Plate Number	Bulk Density
100Y	87.5	2.5±0.5	30	50	80	3.5	1	300
125Y	85	2.5±0.5	23	42	80	3	1-1.5	370
160Y	84	2.2±0.2	17	30	80	2.8	1.5-2	384
250Y	82	1.4±0.2	13	22	80	2.5	2-3	450
350Y	80	1.2±0.2	9	15	80	2	3.5-4	490
450Y	76	1.0±0.2	6	11	80	1.5-2	4-5	552
550Y(X)	74	0.8±0.2	5	10	80	1.4-1.8	6-7	620
650Y	73	0.8±0.2	4.5	9	80	1.2-1.5	6-7	640
700Y(X)	72	0.8±0.2	4.5	8	80	1.2-1.4	5-6	650
Remark	We also can customize the products as your requirements.

Chemical composition

SiO2	Fe2O3	CaO	Al2O3	MgO	Other
≥72%	≤0.5%	≤1.0%	≥23%	≤1.0%	2%

Physical property

Index	Value
Specific gravity(g/cm3)	2.5
Water absorption(wt%)	≤0.5
Acid resistance(wt%)	≥99.5
Loss in burn(wt%)	≤5.0
Max. operating Temp.()	800
Crush strength(Mpa)	≥130
Mohs Hardness(Scale)	≥7

Applications

1.Rectifying organic halide.
2.Rectifying and absorbing some corrosive mixtures, which are definitely regulated in pressure drop and theoretic plate number.
3.Applied in some towers that contain a large quantity of natural media used to absorb nitric acid and concentrated sulfuric acid, as well as

for purifying the air in chemical plants.
4.Operating in vacuum conditions at a bottom absolute pressure of 100pa.Used in heat exchanger and demisting, or as a catalyst carrier.