Supply PE granules/HDPE / LDPE/ LLDPE / Vigin / Recycled
Supply PE granules/HDPE / LDPE/ LLDPE / Vigin / Recycled
Supply PE granules/HDPE / LDPE/ LLDPE / Vigin / Recycled
Supply PE granules/HDPE / LDPE/ LLDPE / Vigin / Recycled
Supply PE granules/HDPE / LDPE/ LLDPE / Vigin / Recycled
Supply PE granules/HDPE / LDPE/ LLDPE / Vigin / Recycled

Supply PE granules/HDPE / LDPE/ LLDPE / Vigin / Recycled

USD $840 - $1,022 /Ton

Min.Order:1 Ton

Supply Ability:
3000 Ton / Tons per Month
Port:
xingang
Payment Terms:
T/T

Quick Details View All >

Brand Name:
Sinopec
Model Number:
8500

Yiwu Zhongtuo E-Commerce Firm

Business Type: Trading Company
Jinhua Zhejiang China
Main Products: hardware ,general merchandise ,jewelry

Product Details

Virgin Hdpe Granules

 

1.Introduction

HDPE has several properties that make it ideal as a packaging and manufacturing product. It’s stronger than standard polyethylene, acts as an effective barrier against moisture and remains solid at room temperature. It resists insects, rot and other chemicals. It is easily recyclable and can be used again and again. Recycled HDPE creates no harmful emissions during its production or during its use by the consumer.  Also, HDPE leaks no toxic chemicals into the soil or water.

 

HDPE is one of the most commonly used plastics in the world. It is typically found in milk jugs, plastic bags and refillable plastic bottles. In addition to plastic lumber and recycled plastic furniture, recycled HDPE is used to manufacture lawn and garden products, buckets, crates, office products and automobile parts.

 

2.Grade

HDPE pipe grade can be used in the production of pressure pipes, such as pressurized water pipes, fuel gas pipelines and other industrial pipes. 

HDPE Injection grade, red, blue, green, 

HDPE Blow grade, white, grey, black 

HDPE Pipe Grade black pellet 

HDPE coating grade

And So On

 

3.Specification

HDPE cable material Property

Typical Value

Mass density  g/cm 3

0.941-0.959

Melt flow Rate(190 centidegree /2.16kg)g/10min

≤1.0

Tensile yield strength  MPa

≥19.0

Flexural modulus  Mpa

≥965

Elongation@ break %

≥400

Impact Embrittlement temperature centidegree

MAX -118

Dielectric Constant

100KHZ

2.32

1MHZ

2.31

Loss Tangent

100KHZ

MAX 0.0001

1MHZ

MAX 0.0001

Volume resistivity OHM-CM

MIN 1x10 15

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4.Products Properties

High density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about 130 °C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good.

 

5.Storage:

Shelf life: It should avoid damp, contaminated and direct sun light during transport.And should be stored in ventilated and dry place. Do not put it with flammable and corrosive substances together,and away from the fire.

Supply PE granules/HDPE / LDPE/ LLDPE / Vigin / RecycledSupply PE granules/HDPE / LDPE/ LLDPE / Vigin / RecycledSupply PE granules/HDPE / LDPE/ LLDPE / Vigin / Recycled

Contact Supplier

Address
F2-13405, District 2, International Trade Mart, Yiwu

You May Like

New Products

Recommended Products

View More View Less

Find Similar Products By Category

Rubber & Plastics > Plastic Raw Materials > HDPE
Categories
Hi~