MONEL Welding Electrode 141 is used for shielded-metal-arc welding of Nickel 200 and Nickel 201, welding the clad side of nickel-clad steel, and surfacing of steel. The reaction of titanium with carbon in the weld metal holds free carbon to a low level so that the electrode can be used with low-carbon nickel(Nickel 201). The weld metal has good corrosion resistanance, especially in alkalies. The electrode is also used for dissimilar welding, including joints between Nickel 200 or 201 and various inor-base and nickel-base alloys. Nickel welding electrode 141 can be operated in all welding positions.
The electrodes provide excellent operability for groove and fillet welding in the downhand position and the smaller diameter electrodes are also suitable for all position welding. Power supply: direct current, electrode positive.
Specifications
AWS A5.11 ENi-1(UNS W82141)
ASME II, Part C, SFA-5.11, ENi-1(UNS W82141)
ASME IX, F-No.41
DIN1736 EL-NiTi3(2.4156)
(EN)ISO14172-ENi2061(NiTi3)
Supply to these specifications available upon request
For manufacture to ASME III(NCA3800, NB2400), MIL and other specifications please refer your inquiry to the technical department prior to order placement.
Approvals
VdTUV 1286.02
Other approvals may be applicable, please confirm details of current scope of approvals with the technical department prior to order placement.
Limiting Chemical Composition
Ni+Co | C | Mn | Fe | S | Cu | Si | P | Ti | Al | Others |
92.0 min | 0.10max | 0.75 max | 0.75 max | 0.02max | 0.25 max | 1.25max | 0.03max. | 1.0-4.0 | 1.0 max | 0.50 max |
Minimum mechanical properties
Tensile strength, psi 60,000
Mpa 414
Elongation, 4d% 20
Available Product Forms-Supplied in 10lbs(4.54kg) hermetically sealed containers
Diameter | mm in | 2.4 3/32 | 3.2 1/8 | 4.0 5/32 | 4.8 3/16 |
Length | mm in | 229 12 | 356 14 | 356 14 | 356 14 |
Current(DC+) | A | 65-85 | 90-125 | 125-170 | 170-225 |
