Nickel base alloy MonelK- 500 stainless steel fasteners full thread hex bolt Monel400
USD $0.1 - $10 /Piece
Min.Order:50 Pieces
Nanjing Xidiou Stainless Steel Co., Ltd.
Nickel-base alloy Monel K-500 /2.4375 stainless steel fasteners hex heavy nuts Monel400
Monel K-500 bolt UNS N05500 bolt EN 2.4375 bolt high strength bolt Monel400
Alloy Monel K-500 /Monel 400 stainless steel fasteners hex bolt nut and washer
alloy400 uns N04400 EN2.4360 stainless steel bolt screw online shopping
Monel400 stainless steel stud bolt UNS N04400 EN2.4360 online shopping
Monel400 hex bolt and nut alloy400 EN2.4360 N04400 stainless steel shopping
Nickel base alloy MonelK- 500 stainless steel fasteners full thread hex bolt Monel400
MONEL® K-500
UNS N05500 DIN2.4375
Other common names: Alloy K500
Monel K500 is a precipitation-hardenable nickel-copper alloy that combines the excellent corrosion resistance characteristic of
Monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength and hardness,
are obtained by adding aluminum and titanium to the nickel-copper base and by a thermal processing used to effect precipitation,
typically called age hardening or aging. When in the age-hardened condition, Monel K-500 has a greater tendency
toward stress-corrosion cracking in some environments than Monel 400. Alloy K-500 has approximately three times
the yield strength and double the tensile strength when compared with alloy 400. Plus, it can be further strengthened
by cold working prior to precipitation hardening. The strength of this nickel steel alloy is maintained to 1200° F
but stays ductile and tough down to temperatures of 400° F. Its melting range is 2400-2460° F.
Chemical Composition, %
Ni | Cu | Al | Ti | C | Mn | Fe | S | Si |
63.0-70.0 | Remainder | 2.30-3.15 | .35-.85 | .25 max | 1.5 max | 2.0 max | .01 max | .50 max |
1.Material quality assurance. All the products have the quality certificate.
2.Size and type:
Bolt: M6-M64 full thread or half thread
Nut: M6-M64
Threaded Rod:4-2000mm
Plain washers:M3-M64
And heavy hex bolts and nuts with all sizes.
3. Treatment:cold forging.hot forging. wiredrawing. metal cutting.
4.Materials option: Stainless Steel 304.304L.321.347.316.316L.724L.725LN.317.317L.309.309S.310.310S.
904L.254SMO.1.4529.AL6XN. 2205.2506.2507.Zeron100. C276.C22.C4.B2.
GH3128/3030/3044.GH4145/4146/4169. A286. Monel400.K-500.Inconel 600/625.
Incoloy800/800H/800HT. Incoloy825. Inconel etc.
5.Standards:DIN. GB . JIS. AISI/ASTM/ANSI/AMSE and BS EN. etc.
6.Packing : Cartons then pallet, or wooden box, or by clients' requirements.
7.Exported countries: North America.South America.Eastern Europe.Southeast Asia.
Africa. Oceania. Mid East. Eastern Asia. Western Europe.all world.