Monel K-500 bolt UNS N05500 bolt EN 2.4375 bolt high strength bolt Monel400
USD $0.1 - $10 /Piece
Min.Order:30 Pieces
Nanjing Xidiou Stainless Steel Co., Ltd.
Alloy Monel K-500 /Monel 400 stainless steel fasteners hex bolt nut and washer
alloy400 uns N04400 EN2.4360 stainless steel bolt screw online shopping
Monel400 stainless steel stud bolt UNS N04400 EN2.4360 online shopping
Monel400 hex bolt and nut alloy400 EN2.4360 N04400 stainless steel shopping
Monel400 N04400 2.4360 stainless steel fastener bolt din933 online shopping
Monel K-500 bolt UNS N05500 bolt EN 2.4375 bolt high strength bolt Monel400
MONEL® K-500
UNS N05500
DIN 2.4375
Other common names: Alloy K500
Monel K500 is a precipitation-hardenable nickel-copper alloy that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength and hardness, are obtained
by adding aluminum and titanium to the nickel-copper base and by a thermal processing used to effect precipitation, typically called age hardening or aging. When in the age-hardened condition, Monel K-500 has a greater tendency toward stress-corrosion cracking in some environments than Monel 400. Alloy K-500 has approximately three times the yield strength and double the tensile strength when compared with alloy 400. Plus, it can be further strengthened by cold working prior to precipitation hardening. The strength of this nickel steel alloy is maintained to 1200° F but stays ductile and tough down to temperatures of 400° F.
Its melting range is 2400-2460° F.
Chemical Composition, %
Ni | Cu | Al | Ti | C | Mn | Fe | S | Si |
63.0-70.0 | Remainder | 2.30-3.15 | .35-.85 | .25 max | 1.5 max | 2.0 max | .01 max | .50 max |
Fastener Type | bolt&nut/screw/stud bolt//threaded rod/washer | |
Bolt | Type | Hex head bolt; hex socket head bolt; square head bolt; U-bolt; T-bolt; round head bolt;Machine bolt; expansion bolt; CSK Head square carriage bolt; eye bolt; |
Specification | Threads diameter: M6-M64. length: 10mm-500mm | |
Standard | DIN931;DIN933;DIN975;DIN976;DIN915;DIN316;DIN444; DIN580; DIN916; DIN914; DIN913; DIN912 | |
Screw | Type | hex screw; hex socket cap screw;hex socket countersunk head screw |
Specification | M6-M64 length: 6-500mm | |
Standard | DIN913; DIN912; DIN 7984;DIN 933; DIN84; DIN85; DIN7972; DIN694; DIN7971; DIN7973 | |
Nut | Type | Hex nut;square nut; wing nut; weld nut; Coupling nut; Cap nut; flat nut; lock nut;half nut; full nut; |
Specification | M6-M64 | |
Machining | CNC turning, , CNC milling, CNC drilling and CNC boring by vertical CNC machine and Horizontal CNC machine | |
Standard | DIN 934; DIN 439; DIN315; DIN985; DIN928; DIN929; DIN582; DIN6334; DIN917 | |
Washer | Type | Plain washer; flat washer; spring washer;square washer; slant washer; wave washer |
Specification | M6-M64 | |
Standards | DIN125, DIN435, DIN9021, DIN433, DIN440R, DIN1440,DIN1441, DIN93, DIN7349, DIN1052, DIN988; DIN7603; DIN137A, DIN137B; DIN6769; DIN6797J; F436; DIN6798V; DIN 127B,ANSI18.21.1,DIN127A,DIN7980; DIN6798J;DIN6798A;ROUND WASHERS WITHOUT HOLE,BS4320 F/B,NFE25514Z/M/L/LL, IFI NARROW/WIDE |