fish and chips fryers with Double baskets induction fry machine|industrial electric fryer
Product Features:
1.International popular style
2.Elegant Appearance
3.Made of stainless steel, durable
4.Efficent, Energy-saving, Practical
5.Electric compents are of good quality, safety, and energy saving
6.Stainless steel heating element of high efficiency
7.Stainless steel body
Operation method:
1. The use of two-thirds in the oil pan to join before;Heat pipes are strictly forbidden to dry!
2. The thermostat is located in the front of the product, in order to control the heating temperature
of electric heating tube, from the guarantee The use of the fryer oil inside temperature.
3. The power of green power indicator, agenda shall be clockwise rotation thermostat respectively,
the required Of temperature on the position of the required temperature, the orange light is lit,
has for current at this time To the furnace, heating tube begin to work, when the temperature rose
to the required temperature, the temperature controller can be self Move to cut off the source of power,
and the orange light, heating tube to stop working, and when the temperature slightly Fall, the
thermostat is automatically switched on the power and the orange light is lit, restore and electric
heating tube Heat, the temperature rise so cycle, to ensure the constant temperature within the
range set.The root, according to the need to adjust the temperature to the required temperature
scale, can be Fried food ideal effect.
4. In use process, the abnormal phenomenon, must immediately stop using, on checking out
Failure, may continue to use.
1. Electric box flip or mobile electrical box, must stop heating, cut off power supply.
2. This product should be kept in balance, left side from non-combustible material more than 10 cm,
on the back Should be from non-combustible material (such as a brick wall, etc.) more than 20 cm.
3. This equipment is used in the power supply voltage must be consistent with the power supply voltage
of the product nameplate.
4. Add oil must be flooded during heating tube to add to the highest oil level line (MAX), when the
discharge of oil Appropriate and discharge of oil after frying oil cooling, do not move or winding groove
heat rods.
5. The user should be near the equipment fitted with suitable power switch, fuse and leakage protection
Apparatus, in front of the switch is not allowed to pile up sundry, convenient operation.
6. Before using this equipment must be safely grounded!
7. Check the product before starting the electric component connection is strong, safe grounding
is reliable.
8. Replace the power cord should choose the same cable, and professional personnel change.
9. This product is the electrical connection in the installation and maintenance, please hold certificate
to operating personnel should be installed.
Cleaning and maintenance:
1. When cleaning and maintenance, should cut off power supply, prevent the happening of the accident.
2. After work every day are available do not contain corrosive cleaner wet towel, clean furnace table
Surface and the power lead wire surface, it is strictly prohibited direct flush with water!So as not to
damage the electrical performance.
3. In the process of cleaning, clear in time the oil bowl of water, in case of overflow.
If you like our product, contact with me.
My cared: