Product Details

wooden pallet machine features:
1.large capacity
2.low labor
3.good performance
4.high benifit

Working process

Raw material crushing-----material drying-----adding glue-----mixing-----pressing

-----Storage.

Machine operation:

Easy to operate the machine, only need to connect hot oil can run, each hot press machine can press one pallet each 8 minutes, each machine can produce 144 piece per day, three set machine need 2 person to operate, the crusher, dryer need 2 person to operate.

1.the crusher:

This crusher is used to crush the wood waste wood board, bamboo board into the materials into pallet material.

Model	LK500
Capacity	800-1500kg/h
Rotary speed	2600r/min
Hammer quantity	24
Hammer size	170506mm
Main motor	22kw
Blower motor	4kw
Suitable materials size	Width less than 80mm thickness less than 15mm
Inlet size	Width350* height 120mm
Weight	850kg
Dimension	250016001100mm

2.the dryer:

unction: This machine is used to dry the wood flakes to fewer than 8% moisture.

Model	LKW1400
Drive motor	5.5kw
Fan motor	3kw
Capacity	600-1000kg/h
Rotary speed	Can adjust from 1-20r/min
Heating way	Heated thermal oil or steam
Heating materials volume	0.64cubic meter
Moisture reduce	From 40%-under 10%
Feeding way	Belt conveyor or screw conveyor or manual feeding
Diameter of the rotary chamber	1400mm
Length of rotary chamber	9000mm
Hot oil duct length	380meter
Oil temperature	inlet 180degree outlet 150degree
Oil pressure	0.7Mpa
Weight	8000kg
Dimension	160095002100mm

3.the mixer:

Function: This is automatic glue mixing machine, which is used to mix liquid UF resin with the wood flakes equally.

Model	GMM-1600
Motor power	7.5kw
Materials	Wood flaks and liquid glue
One time mixing weight	160kg wood flakes per time
Chamber volume	2.5cubic meter
Mixing times	250seconds

4.the presser

Function:this hot press machine is used to press the mixed wood flakes into wood pallets

Model	LKP-800(Manual feeding machine)
Pressure	800Ton
Hydraulic oil cylinder diameter	320
Hydraulic oil cylinder quantity	4
Feeding way	Manual feeding
Lifting oil cylinder	Diameter 100*2
Heating temperature	150degree
Main motor	7.5kw
Pallet density	850kg/cubic meter
Capacity	120-144pce per day(16hours)
Time for enough pressure	35 seconds
Time for one piece	450seconds
Pallet size	Pallet size less than 13001250mm (can make 2-3 letter on mould) 1100900*200mm
Weight	11500kg
Dimension	230013004300mm
One machine include one set mould (any moulds size you like) We make mould according your design.

5. Organic thermal medium boiler (Combined oil boiler)

Data	Model	Parameter	LG-60
Rated power Kw			700
Heating load×104kcal/h			60
Thermal efficiency%			71(66)
Design pressure Mpa			0.7
Maximum working temperature ℃			320
Medium circulation speed m3/h			80
Medium volume in boiler m3/h			0.7
Calber of master tube DN			100
Installed capacity kw			28(25)
Coal consumption kg/h			170(183)
Fan		Model	T4-72 3A
		Flow m3/h	1588-3049
		Wind pressure Pa	1142-716
		Power Kw	1.5
Induced-draft fan		Model	YX5-47 5C
		Flow m3/h	4840-8900
		Wind pressure pa	1843-1265
		Power Kw	5.5
Circulating pump		Model WRY	100-65-200
		Flow m3/h	60
		Height m	38
		Power Kw	11