huamei diamond microdermabrasion machine/beauty salon equipment/ microdermabrasion machine for skin clean

Theory of Microdermabrassion

The newly developed "Micro-Dermabrasion" is a kind of quick, safe and efficient skin renewal technique to polish skin with thousands of different build-in diamonds in the machine. It is could be controlled by user to reach different depths of skin and have good curative effect on pigmentation, acne, rough pore, scarring, sun demaged skin or wrinkles. 

Advantage of Microdermabrassion

1. Designed according to abundant alinical data worked out by many famous clinical doctors.

2. Two powerful imported water pump is much more effecient than other supplier. 

3. Smart designed LCD screen is so easy to operate.

4. Easy to operate: The handpiece tip is smart and can be applied on the skin directly. 

Specification

Application of Microdermabrassion

1. Removing scarring and dirty from skin. 

2. Decreasing acne, pock, rough pores. 

3. Removing tint colour speckles, tiny wrinkles, wrinkles, pock and etc.

Operating instruction for Diamond Dermabrassion

1. Push in the movable ring of copper nozzle at the hand piece, and pull out the 6x4 size vacuum hose. Then push in the black plastic ring on the vacuum hose.

2. Put a drop of cream or milk lotion on the vacuum hose nozzle, push in the movable ring and insert the vacuum hose to the limit.

3. Insert a cotton swab into the Diamond Head, then tighten up the Diamond Head on the handpiece. Remove the cotton swab after every treatment.

4. Turn on the power switch.

5. Adjust the vacuum intensity by vacuum regulator according to the following reference table, the intensity display on vacuum gauge and check with the client for comfort, hoome Microdermabrassion machine.

6. Use the incline area of handpiece to contact with the skin surface. Proceed with a slow sliding motion. Do not place the handpiece at one spot for too long, doing so will cause harm to skin.

7 Adjust the crystal flow rate by the vacuum regulator slowly from minimum to maximum. For commonly use, do not set the flow rate to maximum unless it is of necessity. This is for better comfort intensity.

8. Gently stretch the skin with thumb and finger and glide the handpiece 2-3 times over the area being treated. Then cross again in different directions to prevent streaking lines as in the reference picture. Brush strokes or polishing motions may be used in different sites.

Do not use on these areas

*. Sensitive skin

*. Skin Rash

*. Damaged, inflamed or infected skin.

*.  Surgical scar less than 12 months old.

*. Skin swollen

*. The probes can not point to Eye ball.

*. Genitals.

Accessorie of Microdermabrassion

*. Crystal treatment handpiece

*. Diamond treatment handpiece

*. Key

*. Power cord

*. Fuse

*. User Manual